[Steven Biggs]

I do a small estate where each house has 2 round Windows . Anyone recommend the best brush for getting in the corners .as I'm struggling . Cheers.

[Shrek]

I do a small estate where each house has 2 round Windows . Anyone recommend the best brush for getting in the corners .as I'm struggling . Cheers.

Sorry can you repeat the question please - you are struggling to get into the corner of a round window 

[P @ F]

I do a small estate where each house has 2 round Windows . Anyone recommend the best brush for getting in the corners .as I'm struggling . Cheers.

Sorry can you repeat the question please - you are struggling to get into the corner of a round window 

You took the words right out of my mouth , only on CIU 

[p1w1]

I do a small estate where each house has 2 round Windows . Anyone recommend the best brush for getting in the corners .as I'm struggling . Cheers.

[P @ F]

I do get your point though , if you do enough of them in a day a Gardiner stock would get beasted !
Dare i say that i might consider putting an oval Vikan on a seperate pole for the day 

[deeege]

I find the water fed Doodlebug perfect for getting right into those round window corners!

[The Jester of Wibbly]

Just use a swivel neck for your brush


Simple..

[Phil J]

Use a round brush for those hard to reach corners on round or oval windows. Triangular brush for everything else.

[nathankaye]

Think H man might be onto something here, as this might be the solution



 

[Plankton]

Nah he'd fit some carpet on the end.

[Slacky]

Anything that splays.

[Steven Biggs]

Some great ideas there . I will look into them thanks . Also on the same estate they all have a square picture window , no openers . Easy to clean you would think . But the builders put them in upside down . Making em very tricky to clean without leaving any runs or drips . Any top tips  to make it a bit easier . Cheers .

[paul alan]

Round windows with hard to reach corners and upside down picture windows??

Are you getting enough sleep mate??

[John Mart]

Love this thread. Especially the serious answers. 

[P @ F]

Some great ideas there . I will look into them thanks . Also on the same estate they all have a square picture window , no openers . Easy to clean you would think . But the builders put them in upside down . Making em very tricky to clean without leaving any runs or drips . Any top tips  to make it a bit easier . Cheers .

Turn  the brush 180 degrees  , start at the bottom and work up , that should sort it 

[windowswashed]

Problem with round windows is you will just keep going round and around  but at least you can't miss the corners 

[Steven Biggs]

Some great ideas there . I will look into them thanks . Also on the same estate they all have a square picture window , no openers . Easy to clean you would think . But the builders put them in upside down . Making em very tricky to clean without leaving any runs or drips . Any top tips  to make it a bit easier . Cheers .

Turn  the brush 180 degrees  , start at the bottom and work up , that should sort it 

that is a great idea . Next clean I will get the lad doing all the upside down square ones .  But I think I have Sussed out what to use on the round Windows . Got an old mop head , put it on the pole and gets all those corners with very little effort .

[Dry Clean]

Some great ideas there . I will look into them thanks . Also on the same estate they all have a square picture window , no openers . Easy to clean you would think . But the builders put them in upside down . Making em very tricky to clean without leaving any runs or drips . Any top tips  to make it a bit easier . Cheers .

There's no easy or cheap way to get around this, firstly you will need to purify your water to parts per billion then heat it to a
minimum of 70 degrees (concrete melting hot or more ) and finish off by putting an additive in your water to make it nice and slippy, would also recommend a minimum of ten jets on your brush, fan and pencil mix.

[P @ F]

^^^^

Im just waiting for Nath now 

[nathankaye]

Some great ideas there . I will look into them thanks . Also on the same estate they all have a square picture window , no openers . Easy to clean you would think . But the builders put them in upside down . Making em very tricky to clean without leaving any runs or drips . Any top tips  to make it a bit easier . Cheers .

There's no easy or cheap way to get around this, firstly you will need to purify your water to parts per billion then heat it to a
minimum of 70 degrees (concrete melting hot or more ) and finish off by putting an additive in your water to make it nice and slippy, would also recommend a minimum of ten jets on your brush, fan and pencil mix.

^^^^

Im just waiting for Nath now 

No, i think seans cracked it!   Just forgot to mention tho that he needs a massive brush on the end of pole and that would be perfect setup