Yep.
New pic has been updated and it’s 4 jets, but 4 jets really close together. 
Why not have 4 jets evenly spaced. I’m
Still waiting for the dream brush. 
This is the first brush in the new DuPont™ Hybrid range that we have released - the 26cm (10") standard version. We have had these on testing now for over 6 months and all of our testers have been very impressed with the cleaning and ability and the feel of the brush on the glass. It has rapidly become our testers favorite brush. It is also slightly lighter than our standard Ultimate brushes.
This will be followed by 35cm (14") and 45cm (18") versions in due course.
Jet Spacing - On the standard 26cm (10") version just released the jet holes follow our standard pattern - why this pattern and not 4 evenly spaced jet holes?
This is because the brush has to be adaptable to suit the majority of our brush users preferences. Currently the majority of users want to use either two pencil jets or two fanjets. The twin holes allows some users to have both type fitted next to each other and simply switch T connectors when they want to change.
The desire for jet holes has to be balanced by the loss of bristles around jet holes. Where fanjets are fitted then there needs to be a wider bristle gap around each jet hole. Therefore the current setup has a wider gap around the twin jet holes which suits having either type fitted.
If we had four evenly spaced jet holes on this 26cm (10") brush then none of these holes would be in exactly the right place for the majority of users who use just 2 jets. Also due to the fact that we would need to allow enough space around each jet hole for fanjet use we would would end up losing a few more bristle bunches in each brush - whilst this would lighten the brush it would also reduce cleaning efficiency.
So currently on our 26cm (10") brushes we are staying as we are - however we are looking at jet hole placing moving forward and this may be open to review.
In reality on this size brush two jets with a decent flow rate is usually enough to clean quickly & efficiently for the majority of our brush users. For those that want a different setup we have the fanjet overspray rinse-bar and we are also just about to release a 30 jet rinse bar that fits on top of any of our brushes. There is also the ability for clients to remove bristle bunches and drill extra jet holes (4.8mm) if they want to tailor our brushes to their exact needs.
Looking at the jet holes on the 35cm brushes -
- these are setup to allow the use of 4 pencil jets as shown. If used with just 2 jets then the other jet hole is used to provide better balance across the width of the brush. This is the jet hole pattern that will also be used on the 35cm DuPont™ Hybrid brushes.