[JandS]

Anybody any ideas for the best stuff to clean this...it's at the nursery where the wife works and I'm guessing they are wanting me to clean it cheaply for them.

[Kev Martin]

We cleaned some once using a lightweight 13” rotary fitted with a carpet brush, minimal spray and a wet vac on low.  It worked but it was a similar situation a charity job in a school for mentally challenged kids.  Then we did another one in a Hi-Fi Dept of a very well known department store and did it the same way but we got well paid for that

[*Derek*]

We cleaning some last year with Hot washer, Mosmatic with vacumm port and recovery.  It was in a car showroom covered in grease and oil. Came up a treat!

[JandS]

What cleaning solution Kevin.

[Kev Martin]

What cleaning solution Kevin.

I just used a pH Neutral but there would be no reason not to use a High Alkaline either if needed provided it was diluted correctly and I would also rinse.  But if the Mosmatic worked above I see no reason why something like an SX 12 wouldn’t work either especially with extraction.  Why not try both methods and seee what is best?

[JandS]

Going to go down the rotary brush and wet vac route.

[Kev Martin]

Going to go down the rotary brush and wet vac route.

Only switch one of the vac motors on or it will start sucking the crumb off