[escorttdi]

any body got a few pics of how they have set up from the tank to the pump to the reel??
what they used for conecter out tank, what they have used for hose/pipe to pump (pic if poss)
how they have connected to pump (again pic if poss)
and finally the pump to reel... what connecter   (pic again)
   pics conecters fittings  sizes etc

[escorttdi]

any body got a few pics of how they have set up from the tank to the pump to the reel??
what they used for conecter out tank, what they have used for hose/pipe to pump (pic if poss)
how they have connected to pump (again pic if poss)
and finally the pump to reel... what connecter   (pic again)
   pics conecters fittings  sizes etc

anybody?

[P @ F]

There should be an outlet elbow on the tank , normal garden hose on that with a jubilee clip , this then to pump with jubilee clip , same out of pump which goes to hozelock fitting onto reel .
I assume no DI ?

[tom20001]

any body got a few pics of how they have set up from the tank to the pump to the reel??
what they used for conecter out tank, what they have used for hose/pipe to pump (pic if poss)
how they have connected to pump (again pic if poss)
and finally the pump to reel... what connecter   (pic again)
   pics conecters fittings  sizes etc

Il post photos of mine in morning 👍

[escorttdi]

cheers tom

[tom20001]

Sorry about delay changing over vans at mo but im sure you get the gist of it from photos 👍

[peekeclean]

hope these help iv used push fit connectors from gardiner poles for most of my pump to hose fitting. thanks joe

[johnny bravo]

are these jg fittings leak free for the 1/2 inch garden hose,   been thinking of trying them, may be easier to set up for a 2 man set up.    then change back to 1 if needed

[peekeclean]

ye jg fittings and i run 2 pumps off one 80ah battrey so im always running 1 pump and 2 when i need someone with me.

[johnny bravo]

just seen you got them from gardiners  J G 1/2 inch fittings

[CleanClear]

Just got rid of the hozelocks in mine and so far looks like a dry van. JG half inch to the pumps. JG 3/4 inch to the reel.

[johnny bravo]

jg to the reel hose,     do you not use a brass swivell on your reel for your pump hose ?  where is your jg  fitted onto your reel hose.

[CleanClear]

No i don't need a brass swivel on mine. If you wanted to drop it down then you would just add on a standard 15mm push fit elbow.


Not all the 3/4 inch fittings will go onto your hose reel, although the correct size the way the fitting sticks out you can't actually get them on your reel. If you stick to the one i showed you above that is fine. Spins great and no leaks either.