[peekeclean]

Hi Guys just trying to see how you can fit 1/2" LLDPE(john guest pipe) Tubing to my hose reel elbow?.
see somewhere a push fit going from tank to hose reel useing these fitting so any idears would be great.
thanks joe

[DeLuce]

I suppose it depends upon which kind of fitting you have to connect too. If it's 3/8" or 1/2" bsp screw that then try looking at these : http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/john-guest-fittings/1-2-fittings/john-guest-1-2-push-in-fitting-to-1-2-male-screw-bspt-thread.html
You may have a different size thread. Worth checking,but this is something similar to what you need. Could always ring up?! 

[peekeclean]

thanks rigsby but iv got the fitting to go from the pump it how to connect to the brass elbow on the hose reel?.
thanks joe

[DaveG]

I use one of these  http://www.toolstation.com/shop/p25998?mkwid=s3Z3fpJI3_dc&pcrid=142508327178&pkw=&pmt=&product=25998&gclid=CPr2jb___c8CFdQ_GwodnEEEdw

Then jubilee a short length of garden type hose on one end and a hoselock type connector onto reel