[Steven Butler]

Ive got some communal areas in a care home coming up that i intend to encap.
The only one ive ever used is Dynamall and was just wondering if theres and new or better ones out now as i dont do much commercial at present.

[neil 47]

still the best , if the areas are heavily soiled extract then bonnet

[JandS]

Don't extract you'll diminish the stain protection it gives.

[JandS]

If your going to extract don't waste Dynamall on it use a proper pre spray...works out far cheaper.

[Steven Butler]

When i last used dynamall on a similar job i didnt need to extract at all....

[neil 47]

my fault didn't make it clear

if heavily soiled after vac spray with chosen std pre spray extract , then bonnet and if needed .
Then spray with dynamall and encap as usual   .

Encaps are only any good on lightly soiled or stained ,In my experience

[JandS]

Steve....I find with heavily soiled areas spray dwell spray again agitate and sometimes go back to it an hour later and do it again....it's such a quick system on the cleaner areas you can afford to take a bit more time on the heavier areas.

[Bernd]

Steve....I find with heavily soiled areas spray dwell spray again agitate and sometimes go back to it an hour later and do it again....it's such a quick system on the cleaner areas you can afford to take a bit more time on the heavier areas.

You are right! I Do the same and get great results with Dynamall.

I did a heavily soiled office last week. Sprayed and agitated with a tan floor pad. Let dwell. Then used a MF pad with scrub stripes. On the realy bad areas as traffic lanes i sprayed a second time and finished with Superzorbs! Came out realy good.

I now upgraded to the Hos Orbot and I think Dynamall with the Orbot could be a real game changer!