This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Smudger

  • Posts: 13438
Re: How would you clean render
« Reply #40 on: March 15, 2016, 06:37:39 am »
It's not about being greedy, it's about business.- you asked after all....  ::)roll


£200 algoclear or £16 hypo, ummm difficault decision 🤔

Then how long have you got to wait for the full effect ? Mid summer ?? Most want to see where the money is spent, quarts has its place as a maintenance/preventative cleaning service.

I wouldn't hypo them algoclear the to should never meet  8)

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #41 on: March 15, 2016, 10:07:27 am »
I hear what you are saying smudger and many thanks for taking the time to quote that up.

It does seem rather daft to spend a lot of money on using algoclear when hypo will do the same job with instant results at a fraction of the cost for sure.








chris scott

  • Posts: 3414
Re: How would you clean render
« Reply #42 on: March 15, 2016, 02:52:32 pm »
£200 Algoclear £15 in bleach…how do you work that out.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #43 on: March 15, 2016, 06:15:12 pm »
Chris, what price do you pay for algoclear pro  and that gel as the price I was sent through seems very expensive to me?

For instance I can get 4x5 litres of this Didecyldimethylammonium Chloride for the cost of 2x 5 litres of algoclear (40% Didecyldimethylammonium Chloride) so it's 10% more concentrated too so will go further diluted down surely.

What do you think?



chris scott

  • Posts: 3414
Re: How would you clean render
« Reply #44 on: March 15, 2016, 08:51:52 pm »
Algoclear is about £15 per litre which makes 40litres of "Render cleaner".
Bleach is £1.60 per litre which makes 5 litres of "Render cleaner" = £12.80 per 40 litres of "Render cleaner".
Algo clear is first press of the soya bean…cheaper DDac has added solvent during the extraction.
The Green Alage is gone whithin 24hrs useing Quats not "mid summer" as stated.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #45 on: March 15, 2016, 10:13:16 pm »
Algoclear is about £15 per litre which makes 40litres of "Render cleaner".
Bleach is £1.60 per litre which makes 5 litres of "Render cleaner" = £12.80 per 40 litres of "Render cleaner".
Algo clear is first press of the soya bean…cheaper DDac has added solvent during the extraction.
The Green Alage is gone whithin 24hrs useing Quats "mid summer" as stated.

Nice post Chris. Thanks  ;)

Mike Halliday

  • Posts: 11581
Re: How would you clean render
« Reply #46 on: March 16, 2016, 08:10:10 am »
For instance I can get 4x5 litres of this Didecyldimethylammonium Chloride for the cost of 2x 5 litres of algoclear (40% Didecyldimethylammonium Chloride) so it's 10% more concentrated too so will go further diluted down surely.

What dilution rate would you use this 50% at? The same as Algoclear 40-1
Mike Halliday.  www.henryhalliday.co.uk

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #47 on: March 16, 2016, 08:42:49 am »
Going by what chris has said using 50% DDac 1 litre should make 50 litres of render cleaner I would have thought?
Anyhow I've been a bit put off buying cheaper after Chris mentioned the solvent thing.

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #48 on: March 16, 2016, 05:15:34 pm »
Oh well that job is booked in the diary now so I better pull my finger out and order some algoclear.
After taking Chris advice I already have a pf trolley so will be using that and wfp with a stiff brush with fan jets fitted to apply the algoclear and brush it in for now. Apparently it goes frothy when brushed in so will not need to flood the walls like the vid and get loads on the ground below.  This will also save cost and the amount of chem need for that job all be it slower to do.

At some point will need to get another pump etc to make up a pump box for the van as am using the pf trolley static at the mo for wfp work.

If this algoclear render cleaning marlarky takes off will then with the money earned on that job and others put towards buying some better kit.

 

Smudger

  • Posts: 13438
Re: How would you clean render
« Reply #49 on: March 17, 2016, 10:10:20 pm »





Yehaaaaaaaaaaa..................!  ;D
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #50 on: March 17, 2016, 10:58:25 pm »





Yehaaaaaaaaaaa..................!  ;D

 ;D

chris scott

  • Posts: 3414
Re: How would you clean render
« Reply #51 on: March 18, 2016, 07:29:56 am »
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #52 on: March 18, 2016, 10:11:12 am »
Wow! that's looks an amazing contrast Chris.

Can I ask what chems were used if any?

Reason why I ask is going by the pics what with the size of the red hose used, what looks like steam at the top of that wall and the after pic what looks like a lance line down that wall I take it someone was using a doff type system on that one Chris? 


chris scott

  • Posts: 3414
Re: How would you clean render
« Reply #53 on: March 18, 2016, 11:29:44 am »
Sorry trade secrets….I was just posting pictures of random dirty walls. ;D
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Kev Martin

  • Posts: 6954
Re: How would you clean render
« Reply #54 on: March 18, 2016, 12:29:40 pm »
Chris

Is that the Cardiff Job?

Kev
"Natural Stone Restoration Specialists" Tel: 0121 773 9129
www.tilinglogistics.co.uk | www.marblelife.co.uk  http://stores.ebay.co.uk/Tiling-Logistics

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #55 on: March 18, 2016, 01:17:21 pm »
Sorry trade secrets….I was just posting pictures of random dirty walls. ;D

Fair enough  ;D

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #56 on: March 18, 2016, 01:20:33 pm »
I know rhino and overs use bleach and doff's on jobs like that for instant results that is why I asked. That is also on big test patch  ;D

Matt.

  • Posts: 1832
Re: How would you clean render
« Reply #57 on: March 18, 2016, 02:00:17 pm »
Fair play to Chris there he's done a decent job on the building.

The thing is smurf companies pay the right price for jobs like that so this is Chris's line of work, what knowledge he's gained over the years is how he's able to bid/do the job and make it look good, if he was to just put it up here, with the amount of lurkers that come on here, he could well be doing himself out of a job.
Don't get me wrong am sure if you was to speak with him rather than having it put up here he would prob point you in the right direction as to what's what.

As far as the doff cleaning goes, I might need Chris to do a job for me when ( that's if I can save up the £7k odd ) if I get round to getting one

Nice job Chris

Smurf

  • Posts: 8538
Re: How would you clean render
« Reply #58 on: March 18, 2016, 02:40:17 pm »
That is what I call big boy's league taking on jobs like that Matty and I can understand why peeps want to keep quiet.
I would also probably poope myself going up in a picker that high now let alone work from one.


Jacqueline Kerr

  • Posts: 194
Re: How would you clean render
« Reply #59 on: March 18, 2016, 03:30:55 pm »
nice job chris scott if you down this way call in mate