Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

oliver collins

  • Posts: 352
How to use chemspec one clean
« on: February 13, 2016, 10:19:49 pm »
Hi guys
How do you use chemspec one clean I know it's a extraction rinse safe on wool.
But do u use a separate prespray or just use one clean as a prespray and then use it as a rinse.
That seems nice and easy

Any advice welcome
Oliver Collins rise n shine cleaning

David Deer

Re: How to use chemspec one clean
« Reply #1 on: February 13, 2016, 10:40:21 pm »
Use it in your tank for the rinse

wayne zabel

  • Posts: 1082
Re: How to use chemspec one clean
« Reply #2 on: February 13, 2016, 11:40:31 pm »
Use it in your tank for the rinse

So would you use a prespray too or just rinse with one clean?






David Deer

Re: How to use chemspec one clean
« Reply #3 on: February 14, 2016, 07:09:51 am »
Pre-spray, agitate, dwell, extract.

Raymondo

  • Posts: 253
Re: How to use chemspec one clean
« Reply #4 on: February 14, 2016, 09:12:21 am »

oliver collins

  • Posts: 352
Re: How to use chemspec one clean
« Reply #5 on: February 14, 2016, 11:34:36 am »
Do my next question is what is the difference between one clean powder and liquid?
Oliver

sean oregan

  • Posts: 293
Re: How to use chemspec one clean
« Reply #6 on: February 14, 2016, 01:14:51 pm »
I will then
One is a liquid the other is a powder
Sorry couldn't resist

wayne zabel

  • Posts: 1082
Re: How to use chemspec one clean
« Reply #7 on: February 14, 2016, 03:52:29 pm »
Pre-spray, agitate, dwell, extract.

So you prespray with One Clean and then also use it in the tank ???

I'm confused as you initially said use it in the tank.

What dilution is the prespray mixed at?

On the link for Liquid One Clean it only gives a dilution rate  for using in the tank.

Probably me that's stupid but I'm a bit confused.Are you spraying from the wand at the said dilution rates and then aggitating ???

oliver collins

  • Posts: 352
Re: How to use chemspec one clean
« Reply #8 on: February 14, 2016, 05:45:53 pm »
No I prespray with a power spray then extract with a rinse
I just wondered if one clean is a rinse agent  which prespray is a good combo ?
And what is the difference between one clean powder and the liquid and the traffic lane cleaner.
As with formula 90 the powder is great but the liquid is not ment to b that good and it creates a lot of foam.
Any ideas ?

john martin

  • Posts: 2699
Re: How to use chemspec one clean
« Reply #9 on: February 14, 2016, 05:59:45 pm »
one clean is pretty poor spec  product  , just use F90

David Deer

Re: How to use chemspec one clean
« Reply #10 on: February 14, 2016, 07:10:15 pm »
Chemspec designed it for use with enzall.  Pre spray with enzall and then use the liquid in the tank. Works on the same principle as Ultimate master.
To be honest I really don't see the point of a cleaning agent in the tank unless it's to neutralise the pre-spray.  If the pre-spray can't clean on it's own then I don't use it.
Use the powdered F90, something like rinse-x in the tank to neutralise and some anti-foam. Or whatever you fancy.

John Kelly

  • Posts: 4461
Re: How to use chemspec one clean
« Reply #11 on: February 15, 2016, 10:05:06 am »
Both powdered One Clean and Liquid One Clean are in tank detergents. They can be used just like that on reasonably clean carpets. No pre-spray required the product does the cleaning as is. This is a brilliant product for wool carpets.
Believe me it does work straight from the tank.
For badly soiled carpets then a separate pre-spray of your choice can be utilised. If there are just odd areas, say in front of sofa/chair then a simple spray from the wand and a slight dwell time before going over with the wand normally suffices.

wayne zabel

  • Posts: 1082
Re: How to use chemspec one clean
« Reply #12 on: February 15, 2016, 03:01:52 pm »
Thanks for clearing this up John

jim mca

  • Posts: 827
Re: How to use chemspec one clean
« Reply #13 on: February 15, 2016, 11:45:09 pm »
If you want to understand chemspecs products and how to use them go on one of the days that Julie does worth a day of your time.