Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Iain macdonald

  • Posts: 121
power burst on wool ?
« on: February 10, 2016, 06:36:00 pm »
Is it safe use power burst on wool as long use acid rinse ?

clive ware

  • Posts: 540
Re: power burst on wool ?
« Reply #1 on: February 10, 2016, 07:02:12 pm »
Yep.

JandS

  • Posts: 4267
Re: power burst on wool ?
« Reply #2 on: February 10, 2016, 07:12:38 pm »
If it's that bad it needs it yes.
Impossible done straight away, miracles can take a little longer.

Mike Halliday

  • Posts: 11581
Re: power burst on wool ?
« Reply #3 on: February 10, 2016, 07:19:47 pm »
Powerburst at  Ph 11 can damage wool in the short time it dwells on the carpet before it's removed by the rinse. ( according to industry experts  ;) )

So you need to use it with caution and make  a  judgment call.  if the carpet is so trashed that it has already been damaged by misuse then any further damage done by the Powerburst would be insignificant and it would be worth it to create an end result that is pleasing to the client.

So in a nutshell use it if the carpets is knackered and it's the only  way to get it clean, don't use it just because it will make the job quicker & easier :)

Mike Halliday.  www.henryhalliday.co.uk

derek west

Re: power burst on wool ?
« Reply #4 on: February 10, 2016, 07:35:15 pm »
Short answer NO
Long answer, what mike said  ;D

tim handley

Re: power burst on wool ?
« Reply #5 on: February 10, 2016, 07:38:00 pm »
Good call Mike................  i used pb yesterday.................  first time in a while,  fantastic results on a seriously trashed wool mix
a very odd location to which i go fairly often, not because i dont clean it well, but because it gets trashed big time, have to say ive not  gone for pb before at this location but it sure made a difference.....  didnt speed it up, it was a long day, but the results were very very good...........  i will be back there in three months, and will be using pb..............(also had a guy threaten me,  try to attack my machine, and had to be interviewed by the local plod, but that a different story)................ one of those sites  that make you realise how lucky you are to be living a fairly decent life.................

Iain macdonald

  • Posts: 121
Re: power burst on wool ?
« Reply #6 on: February 10, 2016, 07:58:25 pm »
I was asking as had wool carpert today used spm  it was  fairly bad came up ok customer was happy but few marks .i was going give pb a try but wasn't 100% sure I could so didn't chance it.I now know for future 

Deep Cleaning Solutions

  • Posts: 673
Re: power burst on wool ?
« Reply #7 on: February 11, 2016, 06:26:34 am »
It's not just what you use. It can be how much you use also   8)
David.
Owner of Deep Cleaning Solutions.
Expert in Web Design & SEO
www.rocketwebsitedesigners.co.uk

John Kelly

  • Posts: 4461
Re: power burst on wool ?
« Reply #8 on: February 11, 2016, 09:55:20 am »
SPM is a lot harsher than Powerburst.

Iain macdonald

  • Posts: 121
Re: power burst on wool ?
« Reply #9 on: February 11, 2016, 09:23:41 pm »
I thought spm was safe use on wool ?

derek west

Re: power burst on wool ?
« Reply #10 on: February 11, 2016, 09:42:48 pm »
I thought spm was safe use on wool ?
it has an oxidiser innit i think,

Carpet Dawg

  • Posts: 2968
Re: power burst on wool ?
« Reply #11 on: February 12, 2016, 12:33:19 am »
Good call Mike................  i used pb yesterday.................  first time in a while,  fantastic results on a seriously trashed wool mix
a very odd location to which i go fairly often, not because i dont clean it well, but because it gets trashed big time, have to say ive not  gone for pb before at this location but it sure made a difference.....  didnt speed it up, it was a long day, but the results were very very good...........  i will be back there in three months, and will be using pb..............(also had a guy threaten me,  try to attack my machine, and had to be interviewed by the local plod, but that a different story)................ one of those sites  that make you realise how lucky you are to be living a fairly decent life.................

Was that a facebook job?

tim handley

Re: power burst on wool ?
« Reply #12 on: February 12, 2016, 04:58:58 am »
no actually... a ccn care home job......... never had any hassle there before, i go quite often... one of them things...

John Kelly

  • Posts: 4461
Re: power burst on wool ?
« Reply #13 on: February 12, 2016, 09:09:21 am »
SPM and our RPM are both PH 11-12. This was tested and demonstrated at TACCA. Both products too high PH for wool in my opinion. May be fine if trashed and you need something with extra bite.

clive ware

  • Posts: 540
Re: power burst on wool ?
« Reply #14 on: February 12, 2016, 02:06:45 pm »
Hi John,
What would you reccommend on wool just out of interest?

John Kelly

  • Posts: 4461
Re: power burst on wool ?
« Reply #15 on: February 12, 2016, 04:18:38 pm »
Our most popular products are Chemspec One Clean, both powder and liquid. Prochem Pre-Spray gold and Fibresafe Gold. DFC105 is also another good choice, good on upholstery too and has more eco credentials than any other on the market.

clive ware

  • Posts: 540
Re: power burst on wool ?
« Reply #16 on: February 12, 2016, 04:31:56 pm »
And any feedback on the 210 John?

Ian Harper

Re: power burst on wool ?
« Reply #17 on: February 13, 2016, 09:54:40 am »
depends? if its one colour you can, but it will damage the feel of the carpet. one reason wool is so popular is its feel under foot. more than one colour and you risk colour run. go wool safe and give it lots of dwell time.

Paul Moss

  • Posts: 2296
Re: power burst on wool ?
« Reply #18 on: February 17, 2016, 10:46:50 pm »
Yes no problem unless it's a bleeder

John Kelly

  • Posts: 4461
Re: power burst on wool ?
« Reply #19 on: February 18, 2016, 09:20:10 am »
Clive, 210 is a good seller too. This is used as a pre-spray, in tank or for low moisture cleaning. It is a Phosphate free microsplitter. PH 7-8.