Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

heritagecleaning

  • Posts: 713
Orbiter loose power connection
« on: November 25, 2015, 10:22:40 am »
My Oreck Orbiter has deveoped a dodgy  connection where the power lead goes into the machine. Any advice? I assume you unscrew the screws underneath and access from there.

Cheers  ;D
Logged

JandS

  • Posts: 4267
Re: Orbiter loose power connection
« Reply #1 on: November 25, 2015, 11:17:31 am »
Same here funnily enough...I assume that's what it is anyway on the Floormac...it's happened once before but can't remember how I took it apart.
Logged
Impossible done straight away, miracles can take a little longer.

Dennis

  • Posts: 2044
Re: Orbiter loose power connection
« Reply #2 on: November 25, 2015, 11:18:59 am »
Logged

Radek Jablonski

  • Posts: 956
Re: Orbiter loose power connection
« Reply #3 on: November 25, 2015, 05:52:44 pm »
Have been fixing it twice. For the first time theres enough cable to use the old one, next time need to exchange the full lengh, its easy enough.
Logged

JandS

  • Posts: 4267
Re: Orbiter loose power connection
« Reply #4 on: December 01, 2015, 01:44:03 pm »
On the floormac you unscrew the 4 screws at the bottom and unscrew the handle from the machine and the engine room comes out with all the wiring.......tend to have to check out the wiring and tighten things up every 8 or 9 months then it's ok again...easy peasy really.
Logged
Impossible done straight away, miracles can take a little longer.
Pages: [1]