[Mike #1]

Very nice Steve good vid .

[DaveG]

Hi Steven, I use and slx 18 as my everyday pole and add (upto 4) extra sections as and when needed.. Would the tubeless system still work with the extra sections on..?

Apologies if it's already been covered!

Cheers

[steven jones]

Hi Dave,

Yes it would work fine.

Steven.

[kempy]

Does the new aqua adaptor only work with this tubeless kit .

Or is the new Aqua-adaptor independent of this tubeless method .

[DaveG]

Hi Dave,

Yes it would work fine.

Steven.

Thanks for the reply. Wouldn't the ejector be "too short" once the extra sections were added?

[Clever Forum Name]

Hi Dave,

Yes it would work fine.

Steven.

Thanks for the reply. Wouldn't the ejector be "too short" once the extra sections were added?

Good question! I fit two extensions to a 25 sometimes!

[steven jones]

No,

It would be unaffected regardless of how many sections are added.
Steven.

[steven jones]

Does the new aqua adaptor only work with this tubeless kit .

Or is the new Aqua-adaptor independent of this tubeless method .

yes
It works regardless .
Steven.

[DaveG]

No,

It would be unaffected regardless of how many sections are added.
Steven.

Thanks again for the replies Steven.. If I added, say 3 sections, How would I reach the ejector to connect and disconnect when It only just comes out of end of the pole without extensions?

[steven jones]

No,

It would be unaffected regardless of how many sections are added.
Steven.

Steven.

Thanks again for the replies Steven.. If I added, say 3 sections, How would I reach the ejector to connect and disconnect when It only just comes out of end of the pole without extensions?

It only is affected on the xtreme poles but I am producing some end caps to sort this, no problem on slx and clx though.

Steven.

[JackieW]

Hi Steven,

Just curious,
if the male fitting is up against the pole bung at the bottom of the pole and
the internal pole hose is  fixed tight at the top of the pole,

is it the stretch in the pole hose that allows you to retract the sleeve ejector?

[steven jones]

Hi Steven,

Just curious,
if the male fitting is up against the pole bung at the bottom of the pole and
the internal pole hose is  fixed tight at the top of the pole,

is it the stretch in the pole hose that allows you to retract the sleeve ejector?

Yes, your spot on!