Hi William, Nano-Powershine was developed specifically for vinyl composition tile (VCT) or basically its recommended for use on any vinyl type floor tiles or any vinyl type sheet flooring which would include Marmoleum, the main features and benefits are once its applied to any vct type flooring there is never a need to strip the floor again.
With conventional vinyl floor polishes they need to be stripped and reapplied every few months depending on foot traffic which can be time consuming and i think most guys know how damaging floor strippers can be to vct type floors from continuous use. This is where Nano-Powershine comes into its own as you never need to strip it off once applied, instead when required depending on foot traffic again you just need to deep clean the vct floor and leave to dry, then just apply one coat of Nano-Powershine to rejuvenate the floor again, Nano-Powershine will dry completely within 5 to 7 minutes depending on conditions if you need to apply a second coating to achieve a higher quality finish.
Can it be stripped yes it can, but because it is very hardwearing and durable there should never be a reason for Nano-Powershine to be stripped from any type vct flooring. regards Tadgh