[Ben Marriott]

I put this in our van once and couldn't get it back out

[Smudger]

Did you have any suspension left ?

Darran

[Ben Marriott]

I'll be honest - I ended up borrowing a Manitou to move it around A full size transit would be fine - our connect DID NOT enjoy it one bit.

[Smurf]

No they don't come out...




And yes I remove the can before running them

Darran

What an ibc 

[samson]

Ben sorry I couldn't get down to sort the frame for the washer and Gennys,  but really excited about getting it done.
Will give you a buzz when I get home 

[Terry A]

I like the reels in smudgers van
Where can I get them?

[Ben Marriott]

I believe they are MTM reels 60M I think and about £109 + VAT

[Kevin Miller]

I'm going to start running out of the van however I'm concerned that if I'm cleaning a patio round the back of the house it leaves your van wide open to thieving bar stewards

[samson]

I'm going to start running out of the van however I'm concerned that if I'm cleaning a patio round the back of the house it leaves your van wide open to thieving bar stewards

Secure it with a chain !

[Smurf]

I've tried both and to be honest I prefer the washers being mobile instead of bolted down in the van.

[Smudger]

Found a really good guy who supply's the odd bit of pressure washing gear 

Darran

[scott aird]

No they don't come out...




And yes I remove the can before running them

Darran

What an ibc 

do you ever have a problem with the hoses touching the exhausts?

[Smudger]

No

I always pulled off more than was required to reach the furthered the point then tuck them into the corner I now have roller guides

Darran

[Jettaway]

Smudger,

Do your washers draw from that yellow hose near the top of the tank?
If so does the other other side of the hose drop down to the bottom of the tank?

[scott aird]

it looks a great setup would love the same in my van, currently using a bowser setup but would be handy to have it mounted in my van, im currently trying to work out how to have a return to tank unloader fitted?

[Smudger]

The yellow pipes are return to tank feeds

The feed to the pw's is at the bottom - it's an ibc tank so it's easy to get a screw fitting then 2 inch bore pipe which in turn splits into 2 one inch bore pipes (1 for each machine)

Give Ben Marriott a shout - or look up his posts for a link, take a picture of your machine and he will know what you need

Darran

[Jettaway]

Looks good to me Darran

[Smudger]

Cheers

[Mike Halliday]

A lot of carpet cleaners use machine that run on petrol and are permanently bolted into the van, these machine start at 18hp right up to 75hp.  we just leave the door open or sometimes for security we will fit an Extention pipe vented through the floor so we can can close the door.