This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

russ_clark

  • Posts: 923
BE 1800WAW Whirlaway spares
« on: June 18, 2015, 07:06:42 pm »
Hi Any of you pressure washing guys point me in the right direction please.
Got one of the above about 13 months old done a few jobs with it but to cut a long story short
it has stopped spinning round? had a friend (engineer) look at it and the bearing are knackered
because someone did not keep it topped with grease (me!)
Were back to me supplier and they do not have any spares in stock and quoted ££££'s for spares
about a weeks wait? offered to sell me new machine and give me £100 back against my one?
Is there a supplier that carries spares that I can order from online?
Thanks for your help
Russ

Ben Marriott

  • Posts: 380
Re: BE 1800WAW Whirlaway spares
« Reply #1 on: June 18, 2015, 08:07:52 pm »
Which bits do you need? No reason anything Whirlaway should not be able to get to you next day!
Two bearings are £25 plus carriage
what else do you need?

Ben
Rutland Pumps Limited - 01572 729412- sales@rutlandpumps.co.uk

russ_clark

  • Posts: 923
Re: BE 1800WAW Whirlaway spares
« Reply #2 on: June 18, 2015, 08:11:17 pm »
Hi Ben

Thanks for reply apparently the bearings are suffed not sure if there is any other damage to the shaft or the little collet?
Russ

Ben Marriott

  • Posts: 380
Re: BE 1800WAW Whirlaway spares
« Reply #3 on: June 18, 2015, 08:15:23 pm »
The inlet kit may have taken a bit of a hit. The shaft should be relatively free of score marks and the same thickness all the way up.

Post a couple of pictures if you have them - WAW are so simple to re build ;)
Rutland Pumps Limited - 01572 729412- sales@rutlandpumps.co.uk

russ_clark

  • Posts: 923
Re: BE 1800WAW Whirlaway spares
« Reply #4 on: June 18, 2015, 08:35:08 pm »
first pic attached

russ_clark

  • Posts: 923
Re: BE 1800WAW Whirlaway spares
« Reply #5 on: June 18, 2015, 08:36:16 pm »
second pic attached

russ_clark

  • Posts: 923
Re: BE 1800WAW Whirlaway spares
« Reply #6 on: June 18, 2015, 08:39:34 pm »
Hi Ben

Can you make head or tail of the pics I have just posted??
Russ

Smudger

  • Posts: 13433
Re: BE 1800WAW Whirlaway spares
« Reply #7 on: June 18, 2015, 08:50:18 pm »
Bens price is about right for a bearing

A lot of people charge outrageous prices for bearings when all you need to do is take the number etched/printed on it or measure the bore - o/d and width then ring someone like BSL and they will supply the correct bearings of goos quality like SKF for a couple of quid

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

russ_clark

  • Posts: 923
Re: BE 1800WAW Whirlaway spares
« Reply #8 on: June 18, 2015, 09:20:38 pm »
Thanks Darren

Only problem is I am useless at anything mechanical unfortunately.
I would rather pay someone to fix it properly than me try and bodge it.
Russ

Ben Marriott

  • Posts: 380
Re: BE 1800WAW Whirlaway spares
« Reply #9 on: June 18, 2015, 09:21:43 pm »
Christ that's had some hammer!
I must admit we get a lot of the heads posted to us for rebuild, the shaft looks VERY worn, bearing shell will need pressing off :)
Rutland Pumps Limited - 01572 729412- sales@rutlandpumps.co.uk

Smudger

  • Posts: 13433
Re: BE 1800WAW Whirlaway spares
« Reply #10 on: June 18, 2015, 09:33:00 pm »
Seen worse  8)

You got my ( quite long ) email Ben  ???

Darran

Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Ben Marriott

  • Posts: 380
Re: BE 1800WAW Whirlaway spares
« Reply #11 on: June 18, 2015, 09:43:21 pm »
Fiddle Sticks* Yes I did will reply when I get into work :D Sorry!
Rutland Pumps Limited - 01572 729412- sales@rutlandpumps.co.uk

Smudger

  • Posts: 13433
Re: BE 1800WAW Whirlaway spares
« Reply #12 on: June 18, 2015, 09:48:01 pm »
b******s! Yes I did will reply when I get into work :D Sorry!

Sorry, was that oh dear me, it slipped my mind 😄

No worries mate

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

wpclean

Re: BE 1800WAW Whirlaway spares
« Reply #13 on: June 18, 2015, 10:31:14 pm »
How do you grease the bearings, and what stuff is the best to use ?

Rob@Blast off

  • Posts: 875
Re: BE 1800WAW Whirlaway spares
« Reply #14 on: June 18, 2015, 10:41:25 pm »
How do you grease the bearings, and what stuff is the best to use ?

Grease  ;D

wpclean

Re: BE 1800WAW Whirlaway spares
« Reply #15 on: June 18, 2015, 11:29:09 pm »
Thanks for clearing that up  ;D

Matt.

  • Posts: 1832
Re: BE 1800WAW Whirlaway spares
« Reply #16 on: June 19, 2015, 03:17:48 am »
Thanks Darren

Only problem is I am useless at anything mechanical unfortunately.
I would rather pay someone to fix it properly than me try and bodge it.
Russ

Same here mate, I would just post it direct to Rutland pumps and let Ben do the repairs.......p&p will prob be what you will spend in fuel running round looking for someone to do it, and if it's got to be pressed, there's no chance of doing a diy unless you have a machine

Ben Marriott

  • Posts: 380
Re: BE 1800WAW Whirlaway spares
« Reply #17 on: June 19, 2015, 11:01:33 am »
Lithium Grease is usually sufficient ;)
Rutland Pumps Limited - 01572 729412- sales@rutlandpumps.co.uk

Jettaway

  • Posts: 521
Re: BE 1800WAW Whirlaway spares
« Reply #18 on: June 20, 2015, 09:41:07 am »
Sounda like bearings.  Mine went the other week. Just go to your local bearing shop.  The bearings are nothing special just standard bearings.  Cost me £20 for a pair

Jettaway

  • Posts: 521
Re: BE 1800WAW Whirlaway spares
« Reply #19 on: June 20, 2015, 09:45:04 am »
Oh and in my case bearings didn't need pressing off, they just slid on and off. Again take to local car garage and they'll do it for next to nothing.  Mine don't even charge me but he does service, mot and fix my van