This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

stuartb

  • Posts: 189
How to connect 4040?
« on: May 11, 2015, 06:55:23 pm »
Can anyone help please. trying to connect up my new 40-40 and I don't know which connector to put the hose with the tap attached onto. The hole in the side or the hole in the end? Is this right what I've done?
Cheers stu
Logged

martinw

  • Posts: 243
Re: How to connect 4040?
« Reply #1 on: May 12, 2015, 08:47:57 am »
you got this wrong. tap goes into side port where you have 90 degree connector.  pure water comes out from the middle side port (currently tap connected) and goes into your resin bottle.
if you run it like this you will never get enough pure water as you will be constantly flushing it
Logged

Spruce

  • Posts: 8462
Re: How to connect 4040?
« Reply #2 on: May 12, 2015, 11:18:15 am »
Quote from: martinw on May 12, 2015, 08:47:57 am
you got this wrong. tap goes into side port where you have 90 degree connector.  pure water comes out from the middle side port (currently tap connected) and goes into your resin bottle.
if you run it like this you will never get enough pure water as you will be constantly flushing it

Agree.

Inlet from prefilters on the other end with single port. Waste as per MartinW on the side and pure where you have the waste.
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)
Pages: [1]