[Carpet2Clean]

Hi Radek

Have you got any pictures of your set up in your van ?



Richard

[Radek Jablonski]

Hi Radek

Have you got any pictures of your set up in your van ?

Richard

[stuart_clark]

Radek
do you use the mytee twist and lock cuffs on your hoses mate ?

[Radek Jablonski]

yes some I got with the mytee filter, but all the rest are cool cuffs
I have all hoses in 25ft lenghts, 50ft ones have been cutted a half.

[stuart_clark]

Radek
nice looking set up mate, dont supose you have ang pics of this feed pump ? From fresh water tank ? And does it work off  the mains or battery ?  Where did you get your hose reel from

Stuart

[Carpet2Clean]

Thanks Radek for the picture

Nice set up........Been looking to do this for a long time out the back of the van.

I am like Stuart looking at getting a more powerful machine (storm or evo)

What hose run are you using with your storm

Richard

[Radek Jablonski]

pump, havent see once I placed it in, but this was some cheap garden submersible  pump. Works from mains, once I connect two power leads I have a 230v inside the van, see the sockets on the first picture, one cable runs to the front and I have a switch there for the pump.

Hose reel and tank cages I welded myself.

There is 100ft of 2inch hoses and 75ft of 1.5 inch hoses. Usually use no more then 70-75ft, somethimes 100ft, more then this realy realy somethines, not recommend due to the suction.
75ft is still very good, 100ft is very acceptable but if more you start feeling the lack of power, but still prefer more hoses, lower pressure and work a bit slower then remove the machine and work with buckets.

[SimonW]

I just bought Storm from Paul Moss. It's stunning! so highly recommend this sweetie.

[Carpet2Clean]

Thanks Radek for the info 

Richard

[stuart_clark]

Simon
so you wont be looking to sell it on then mate ?

[SimonW]

Stuart not at all. I am so happy from this machine... finally I have it

[stuart_clark]

Simon
what machine were you using before the Storm ?

[SimonW]

prochems powermax 125psi and their standard motors

[stuart_clark]

One hell of a difference then ? I might treat myself next week ! Been looking at four machines, the Jag obviously the Evolution , the Enforcer and the Storm, I think out of them all the Storm wins hands down for me ! Not too heavy can be got in and out of my van easily, very easy to work on exellent build quality and a well proven machine and also I have three mates with them that swears by them! What more can I say, I still like the Evolution but its very heavy and its a pity they are putting the smaller motors in them now
So I think the Storm ticks all the right boxes coupled with Matts legenary service, dont think I can go wrong

Stuart

[SimonW]

You're right on every point Stuart.  Choose Storm  buddy.  I just showed it for my mate who knows about cc nothing at all and he straight said that my previous machine looked very poorly compering to storm. I need to order 50ft hoses so will post soon my impressions at 75ft length:)

[stuart_clark]

Simon are you using 1.5" or 2"

[stuart_clark]

I remembef about four years ago, I popped over to see Mike roper in whitby to pick somthing up, he was on a job using his airflex turbo, and I thought my machine looked poope compared to his , no comparrison realy as you the Storm all the way, if it had inbuilt heaters it would be the ultimate portable ever built


stuart

[SimonW]

Simon are you using 1.5" or 2"

I've been told 1.5" and that's the one I have and will order the same mate

[stuart_clark]

Simon

you need 2"mate makes a hell oh a difference mate

[David Ware]

If you fit a portable HWE into your van and make it into aTM i.e. fixed into van would that invalidate your van insurance.  With experience when I said that I had fitted my T/M into van they classified it as a modification to the vehicle. I'am possibly looking at joining the portable club in the future.
David
ps lots of good and free advise from John Martin and Radek Jablonski