This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Avo

  • Posts: 1634
Pump strainer
« on: February 15, 2015, 09:58:27 am »
I've been having a problem with my pump number 2 in the van.  The last few weeks I'm not getting much flow through the pump compared to pump 1 which I thought it's new pump time.. Discovered it's something to do with the delivery hose sat in the tank, it has a strainer thing attached to the bottom which must be stopping water flow but I can't work out where it's blocking up.

Can the shurflo pump strainer units be submerged under water?? 

I can't attach one to pump as the pumps in a very tight space.

simon w

  • Posts: 1647
Re: Pump strainer
« Reply #1 on: February 15, 2015, 10:39:39 am »
Do you mean the strainer on your shurflo pump or submersible pump? if it's on your shurflo pump, just unscrew it when your tanks empty run it under a tap to un-clog and clean it then replace it. You can then prime the pump by running it on full flow for 10 minutes or so returning the water back into your tank. Works for us and we do this on each pump maybe three or four times a year.

Tom White

Re: Pump strainer
« Reply #2 on: February 15, 2015, 10:47:46 am »
Avo, are you talking about one of these:



If so, just like Simon described, when your tank is empty, unscrew it (the bottom transparent bit) and remove and clean the metal filter.  I find using Wor Lass's toothbrush is the best way of getting the gunk out of it.

And no, you can't borrow her toothbrush.

Avo

  • Posts: 1634
Re: Pump strainer
« Reply #3 on: February 15, 2015, 11:10:09 am »
Yes that's the one tosh at the minute I've taken off one like this picture below

Just wanting to no if the shurflo type can go under water as I might buy two of them.

Avo

  • Posts: 1634
Re: Pump strainer
« Reply #4 on: February 15, 2015, 11:13:47 am »
Do you mean the strainer on your shurflo pump or submersible pump? if it's on your shurflo pump, just unscrew it when your tanks empty run it under a tap to un-clog and clean it then replace it. You can then prime the pump by running it on full flow for 10 minutes or so returning the water back into your tank. Works for us and we do this on each pump maybe three or four times a year.
so the hose in bottom of the tank is open ended Simon ?

Tom White

Re: Pump strainer
« Reply #5 on: February 15, 2015, 11:23:30 am »
Yes that's the one tosh at the minute I've taken off one like this picture below

Just wanting to no if the shurflo type can go under water as I might buy two of them.

They're plastic, so should be fine underwater.

Avo

  • Posts: 1634
Re: Pump strainer
« Reply #6 on: February 15, 2015, 11:37:55 am »
😄👍