[CleanClear]

Extending your delivery hose from say 10 Mtrs to 30 Mtrs, is there any discernable loss of pressure ?

Using quarter inch hose as opposed to 3/8 hose, again what the difference performance wise ?

Qucik release connects, any recommendations for a lubricant ?

Unloader return to tank...is it ok to just run it as is, full flow back to tank or is it a good idea to restric it a little so the pump is not just running flat out ?

[KLEENAWAY]

Extending your delivery hose from say 10 Mtrs to 30 Mtrs, is there any discernible loss of pressure ? No

Using quarter inch hose as opposed to 3/8 hose, again what the difference performance wise ? Not with the size of machine you are using, it helps if its a shortish length just before your lance as it easier to handle

Quick release connects, any recommendations for a lubricant ? Just use water to rinse out any c r a p and then give it a squirt of wd40

Unloader return to tank...is it ok to just run it as is, full flow back to tank or is it a good idea to restrict it a little so the pump is not just running flat out ? Not sure exactly what you mean there mike? An unloader is a low pressure way of "unloading" the water when you are not using the lance. There should be no water "unloading" out of it when you have your trigger pulled

[Matt Gibson]

Dont use 1/4" hose. I tried it, lost pressure. Lee kenny will be along in a minute to explain why. I forget.

[CleanClear]

Ok thanks, Danny i'm now using the Interpump. Its 150 bar, but about 12/14 LPM. I'm running it out the drum now and yes there is quite a difference to me speedwise, just due to the volume of water it throws out. Then running out 20Mtrs of 3/8 with about 10 Mtrs of 1/4 before the gun.

[BDCS]

I run 50 mtrs of 3/8" with 15m of 1/4" and thats fine.

[CleanClear]

Thanks BDCS.