Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Jakey boy

  • Posts: 869
Isopropyl in the water? PPM increase?
« on: December 08, 2014, 07:36:55 pm »
WCW sell isopropyl for anti freezing, but surly this causes spotting? Or not? If not then why don't we all use it in out tanks to stop things freezing?

Dave Willis

Re: Isopropyl in the water? PPM increase?
« Reply #1 on: December 08, 2014, 07:47:23 pm »
Because you'd have to use an awful lot of it to prevent freezing at the lower temperatures. TDS is zero so shouldn't cause any spotting. My container of it reads 001 in neat form but that is most likely because I had a different chemical in there before.

Jakey boy

  • Posts: 869
Re: Isopropyl in the water? PPM increase?
« Reply #2 on: December 08, 2014, 07:52:32 pm »
Because you'd have to use an awful lot of it to prevent freezing at the lower temperatures. TDS is zero so shouldn't cause any spotting. My container of it reads 001 in neat form but that is most likely because I had a different chemical in there before.

Let's say 400l of water, I'd have thought it wouldn't take much to prevent freezing up to -2 or -3? Wonder if the di vessel would be effected in anyway..

Might be worth using occasionally...

SeanK

Re: Isopropyl in the water? PPM increase?
« Reply #3 on: December 08, 2014, 08:10:32 pm »
Because you'd have to use an awful lot of it to prevent freezing at the lower temperatures. TDS is zero so shouldn't cause any spotting. My container of it reads 001 in neat form but that is most likely because I had a different chemical in there before.


TDS is only a measure of conductivity and just because a product has zero TDS or conductivity doesn't mean it wont spot
on glass.
Sugar is an example of this, dissolved in water it has no TDS reading but will leave spots on glass when the water dries off.

Dave Willis

Re: Isopropyl in the water? PPM increase?
« Reply #4 on: December 08, 2014, 08:34:01 pm »
Ten percent freezes at - 4     http://www.engineeringtoolbox.com/ispropanol-water-d_988.html

Can't say I've ever tried sugar in my water.

SeanK

Re: Isopropyl in the water? PPM increase?
« Reply #5 on: December 08, 2014, 08:45:49 pm »
Dave was just pointing out that you need to be careful when using TDS as a reason for something other
than purified water not to cause spotting.
Not saying that Isopropyl will as I know nothing about it.
The sugar was only an example of something that doesn't show up on a TDS meter.

Dave Willis

Re: Isopropyl in the water? PPM increase?
« Reply #6 on: December 08, 2014, 09:07:43 pm »
I didn't know that  ;)