[dazmond]

so ive got a 500L tank full to the brim with 39 tds water.tomorrow and sat ill fill up with my tap water(31 tds).

do you think ill get away with no spotting until my fresh resin arrives?

mainly 4 weekly maintenance cleans using hot water.high flow.

im thinking of even turning my water temperature up a few notches!

[chanster00]

will be fine!

not proud but i done this by mistake and got away with it! (for about 3 months)

[jonboywalton75]

Dark nights, people don't check closely as often in the autumn/winter

Just do it, I say!!!!

[deeege]

I cleaned with 031ppm a couple of weeks ago without knowing. I got 2 complaints. 1 from a very good customer who has never complained before and 1 from a first clean that day.

I personally won't clean above 010ppm anymore.

Daz, I'd borrow you some resin if I had any but I'm also needing to order some more next week.

[8weekly]

I would just take the day off.

[gary999]

No comment

[Frankybadboy]

cowboy

[Don Kee]

Do a Garry!!

[8weekly]

Do a Garry!!

Careful, because the only rhyming slang I know involving the word Gary, is to "take it up the Gary". 

[colin purewater]

Now if you would of put the water though an ro
Id say 39 is ok daz

But just though di id say you'll  be getting complaints
and won't leave a good finish

[gary999]

Dazmondo ive been cleaning with tap water in the 30ppm for over twelve
months now.

This is what I find..New estate properties are no problem especially
where the water sheets and dries evenly,older type semis with hydrophobic
glass can be a problem and if it is bucketing down with rain and there
isn't a tornado blowing through its never a problem.

If in doubt though get the squeegee out

Cant remember which chappie it was but he came out with a idea that
results with cleaning with 30+ tds could very well depend on what the
tds in your water is made up of.

anyways these days im cleaning with lots of lovely rainwater...so cleaning
with tap is DISGRACEFUL

[dazmond]

I would just take the day off.

its not just today.its tomorrow and monday too as i reckon it wont get delivered til monday afternoon.im already a day behind even if i work all day today and tomorrow.

i think ill just risk it,check work when dried and blade a few more hydrophobic ground floor windows.

i even did a filthy first clean(ive not cleaned it for 3 years!) yesterday and the water must of been high tds.they dried perfect when i checked them an hour later.

a lot of heavy rain overnight last night and still a bit here this morning.its gonna brighten up in a few hours though.

[g.brookes]

Just drive to a shop and buy some mate. Problem solved. Last time I cleaned with 33 I got 4 complaints in one day. So now like deegee, anything above 10-15 and I get too nervous

[dazmond]

I cleaned with 031ppm a couple of weeks ago without knowing. I got 2 complaints. 1 from a very good customer who has never complained before and 1 from a first clean that day.

I personally won't clean above 010ppm anymore.

Daz, I'd borrow you some resin if I had any but I'm also needing to order some more next week.

no worries danny.did you say Aardvark cleaning supplies sell resin?i could always pop up there and get some unger resin at nearly £100 a bag.

[deeege]

I cleaned with 031ppm a couple of weeks ago without knowing. I got 2 complaints. 1 from a very good customer who has never complained before and 1 from a first clean that day.

I personally won't clean above 010ppm anymore.

Daz, I'd borrow you some resin if I had any but I'm also needing to order some more next week.

no worries danny.did you say Aardvark cleaning supplies sell resin?i could always pop up there and get some unger resin at nearly £100 a bag.

Im not sure they do. Drive up to Corwoods Daz, it's only 15 minutes from you. They stock it don't they?

[Arnold Palmer]

so ive got a 500L tank full to the brim with 39 tds water.tomorrow and sat ill fill up with my tap water(31 tds).

do you think ill get away with no spotting until my fresh resin arrives?

mainly 4 weekly maintenance cleans using hot water.high flow.

im thinking of even turning my water temperature up a few notches!

Don't do it.

[dazmond]

ive just nipped up to corwoods this morning and bought some tulsion.emptied my 500L tank and now purifying water for this afternoon.i might just get 3 hours in!torrential rain has stopped and now the suns come out!

anyway lesson learned.ill be checking my tds every night from now on.i used to do it but lately ive just got a bit lazy!

gotta say corwoods are a great company to deal with.plenty of spares there if you need them quick.excellent trade counter and victoria.well!what can i say?very helpful and friendly(and gorgeous too!)

[Stoots]

where is corwoods?

or any one know of anywhere closer to leeds that does resin?

ta

[SB Cleaning]

I'm on 18 at the moment and will change the resin this weekend I generally don't go over 10 but forgot to check tds! !

[richard groves]

ive just nipped up to corwoods this morning and bought some tulsion.emptied my 500L tank and now purifying water for this afternoon.i might just get 3 hours in!torrential rain has stopped and now the suns come out!

anyway lesson learned.ill be checking my tds every night from now on.i used to do it but lately ive just got a bit lazy!

gotta say corwoods are a great company to deal with.plenty of spares there if you need them quick.excellent trade counter and victoria.well!what can i say?very helpful and friendly(and gorgeous too!)

could you not have connected your di up after the tank and pump ? could have saved you time.
gonna put an inline tds meter after my di in van on my next system (easy to check daily )