This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

wipe clean

  • Posts: 18
HELP new to power washing
« on: October 20, 2014, 05:34:23 pm »
pricing my first block pave drive way 200sqr mtrs roughly
noticed an oil stain and they have asked me if i can re sand

1 what is the best chemical for removal of oil

2 do you normally charge per mtre or per day

3 charge for sanding

I do remember a while ago the first post which seemed to be a permanent post regarding power washing gave a guide on how much to charge as well as other useful tips

thanks

martin

Smudger

  • Posts: 13438
Re: HELP new to power washing
« Reply #1 on: October 20, 2014, 06:20:19 pm »
I use OT8 for oil removal

Charge per sq meter with a minimum charge of £75 for anything less than 20 sq meters anything over 200 sq meters I charge slightly less than my standard rate due to volume.

My price is weighted towards the cleaning so the resanding is most likely lower than others I charge for the sand plus 50% ( best price I get is £3.50 ) so cost it at £5.50 then charge 1 to 2 hrs standard biz rate on top of the cleaning price.

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

wcw

  • Posts: 2
Re: HELP new to power washing
« Reply #2 on: October 21, 2014, 12:53:12 pm »
Thanks for that darren
how long do you think roughly it may take to sand 200 sq mtrs and i would have to come back when its dried out to sand it

Smudger

  • Posts: 13438
Re: HELP new to power washing
« Reply #3 on: October 21, 2014, 08:24:33 pm »
In summer you could do sand the same day ( very hot sunny ) but I always book a return visit allowing 48 hrs to dry out, at this time of year the return is open ended and dependant on a couple of dry days.

If you use the widest head broom you can find (24" for me  :D)  200 sq meters  takes me around an hour to hour and a half on me own ( depending on how hot it is, front or back )

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

wcw

  • Posts: 2
Re: HELP new to power washing
« Reply #4 on: October 22, 2014, 05:34:58 pm »
THANKS FOR ALL THAT INFO IT HELPS ME LOADS
NOW JUST TO BOOK MY I DAY POWER WASH COURSE ON THE 7TH NOV WITH SPINACLEAN THEN I SHOULD BE FULL OF POWER WASHING  KNOWLEDGE

REGARDS

MARTIN

Rob_Mac

Re: HELP new to power washing
« Reply #5 on: October 22, 2014, 05:36:56 pm »
Where are you based?

Rob ;D

Jettaway

  • Posts: 521
Re: HELP new to power washing
« Reply #6 on: October 23, 2014, 12:26:22 pm »
A pressure washing course?!?! For a minute o thought I was on the comedy site?

Smudger

  • Posts: 13438
Re: HELP new to power washing
« Reply #7 on: October 23, 2014, 03:00:16 pm »
A pressure washing course?!?! For a minute o thought I was on the comedy site?

😄

Fair play, pressure washing can be quite daunting until you've done some

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Roger Oakley

Re: HELP new to power washing
« Reply #8 on: October 23, 2014, 04:26:34 pm »
THANKS FOR ALL THAT INFO IT HELPS ME LOADS
NOW JUST TO BOOK MY I DAY POWER WASH COURSE ON THE 7TH NOV WITH SPINACLEAN THEN I SHOULD BE FULL OF POWER WASHING  KNOWLEDGE

REGARDS

MARTIN

Don't want to bust your bubble, you'll learn some of the basics in a one day course possibly, but only hands on experience will start to give you the knowledge and that does take time, every job will have a different set of circumstances etc.