This is an advertisementInterested In Advertising? | Contact Us Here
A problem I have is when using a new rubber it is alright initially but after a few hours’ use it starts leaving comb-like streaks about four inches wide at the end of the squeegee. It happens on both the 14” and 18” squeegees but is more problematic on the 18” as there is less pressure at the end of the rubber. It’s almost as if the rubber is becoming contaminated. I am using Unger channels, pulex rubber and Squeegee Off detergent with a small amount of Sorboglide added.try bending the edges if the channel very slightly then you wont have to use as much pressure espesially on the 18inchgary
do you use a side kick bucket/ bucket on a bealt
try bending the edges if the channel very slightly then you wont have to use as much pressure espesially on the 18inch
what you so happy about callum not that its a bad thing
some times the hip buckets scar the blade! from the lips on the pulex one does with me try this [pic]this is where to buy fromhttp://www.soapnational.co.uk/acatalog/New_Products.html or you could use one of your old blades!!