[gaza]

Gaza

I am not wrong , i have been using this method for months and months and it WORKS!!.

You only need one di vessil and that is it.
When my tds starts rising i put a fresh di vessil after the diminishing one, but this is somewhat  a waste of time because once it starts rising it goes up rapid and can start contaminating your fresh di vessil with an even higher tds reading than your tap water.
So you have to keep an eye on it you will probably get 3 weeks max.

There is a name for it but i cant remember off hand.

Some companies would have you believe you need loads of different vessils in a di system but they have to justify there prices ,so they make it look more complicated than it is.
Some systems have 2 types of resin ,one for positive and one for negative anions.

What system do you use ?  are you an Ro man or di

Dave

DO YOU 1 OR 2 DI VESSELS?

YOU WILL BE USING THE MIXED BED RESIN IF YOU REPLACE THE RESIN THEN DAVE?
quote:put the good resin after the deminished resin are you using 1/2 vessels?
you should put the good resin infront off the bad resin and when you start getting
above 000tds you throw the bad resin away. but you cannot do this if you use 1 vessel as stated.
Ill have 1/2 ounce of what your smoking

You only use seperate resins if you have the system that can recharge and flush out the crud from the resin beads with acids[like Ive got] £3,000 to you DAVID

DAVID CHECK DAIS LAST POSTING ONN 2 DI VESSEL USAGE

  GAZA

 JUDGES WELCOME TO COMMENT
MOD V PRO ONLY JOKING DAVID

[gaza]

It might be a stupid question but does it matter if your set up goes

Tank - Resin - Pump  ??

I'm looking at putting inline filters between the tank and the resin and between the resin and the pump

I USE RESIN - TANK= PUMP -RESIN [POLISH] UP POLE
IN LINE FILTERS ARNT NESS BUT GOOD IDEA

 GAZA

[Moderator David@stives]

I use tank -pump-resin{does all the work} then up pole

[gaza]

I use tank -pump-resin{does all the work} then up pole

are so now ur using only one vessel
but if you used two [think of the money you would save]
cus the old resinn would still have shelf life.
but your tds is only 73
what would you do if it was 276 + 1 vessel would not be enough
you would be throwing resin away that could stiill be off use.

 christ driven into a cul d sac with this subject 

 gaza

[Moderator David@stives]

I put a second resin in front of the fresh one when it strarts depleting but it soon rises above 73 making it useless.
Perhaps i could sell it when it reaches 70 to someone in a high tds area.

Dave

[gaza]

david why not put the delapidated vessel after the good resin to polish the water before going up the pole?

look     


 new resin       storage tank
  in vessel   =             =                                        2nd di
vessel               NEARLY               =PUMP    =                                       =UP POLE
                           000tds water                        for taking a few tds
                                                                         out[polishing]
 l
the first resin vessel can now work longer cus its got a back up, to take out the little bit it carnt remove so you get the most out of your resin ok

 gaza[only trying to help you save DAVE]

  GAZA

[P @ F]

Gaza , thats what i do ...

RESIN/HOLDING TANK/VAN TANK/PUMP/RESIN/POLE.

THIS IS WHAT I HAVE AT HOME , DI ONLY , 100 TDS .

 P @ F   

[gaza]

p@f is that spent resin you using in that black box? good idea, believe i read sonewhwere someone was doing it.
does it work well enough to warrant it?
I ro my water 1st get it down to 001 from 256 been like this for 15,000 litres on 1 litre of resin on ro [wow] am I impressed with my ro
could trickle the water into my spent resin to produce 000 tds for a lot longer
I suppose.
when the ro gives up the ghost still run it through the spent resin in to my 1000litre IBC THEN TO MY TANK IN THE VAN AND THROUGH MY TWO RESIN VESSELS

and get the best of spent resin +my new resin save pounds me thinks


  gaza

[Moderator David@stives]

Gaza

Now you have just said it you are not D.i only ,you have got an ro.

Dave

[stuart webster]

Stop it children!

[P @ F]

Gaza , i used to use my spent resin in the black box , i just whack new resin in it now , it lasts way longer than just using it in the van mount , a bag of resin used to last me 1 month , the last bag i bought since using my filter at home was 23/09/05 , mind you i did have a bit of the previous bag left , so i reckon a bag is now lasting me around 4 months , not bad for DI only is it !

 

 Rich  P @ F