[ronaldo]

Have been wfp for years now and ever since I started one of my major problems is pole hoses kinking and knotting itself up and basically driving me berserk' is there any hose out there where this problem doesn't happen and if so where can I get it.   

[Dave Willis]

Not been invented yet!

Gardiners latest stuff isn't bad but it still needs laying flat and untwisting once a day. I think it's the coiling it up every time that spoils it.

Aquadapter hose is horrendous stuff in my opinion yet some guys love it.

[heath verrall]

The best stuff I used was techbuk or techbuk , don't know if they still do it it's red pipe

[Mike #1]

Been using orange aquadapter hose for over a year now and still going strong , It is the best pole hose I have ever used . Mike

[Positivity]

Have been wfp for years now and ever since I started one of my major problems is pole hoses kinking and knotting itself up and basically driving me berserk' is there any hose out there where this problem doesn't happen and if so where can I get it.   

Undo a clamp and spin the brush head a few times anti-clockwise or clockwise after each job.
You'll soon find out which way to spin the brush head 'cos it will either make it worse or better!!!!
Next time you fit pole hose "condition" it first by unwinding it straight off the coil and laying it out flat for an hour or two.
I unroll mine and leave it stretched out on the rafters of the garage until I need to fit it.

[jk999]

Still waiting for the star treck hose  but dont know when its out

[Arnold Palmer]

Having tried Gardiners latest pole hose offering I am not overly impressed. The hose dose't kink too much, which is great but, as it has gotten warmer and the hose has become softer if you snag it, it pulls right out of the fitting. Annoying.

[Alex Gardiner]

Having tried Gardiners latest pole hose offering I am not overly impressed. The hose dose't kink too much, which is great but, as it has gotten warmer and the hose has become softer if you snag it, it pulls right out of the fitting. Annoying.

If it is pulling off of barbed connectors then the pole hose will need one of these fitting - http://www.gardinerpolesystems.co.uk/acatalog/inner-ring-o-clip-hose-clamp-stainless-steel.html

If it is pulling out of push-fit connections then these can be used - http://www.gardinerpolesystems.co.uk/acatalog/John-Guest-8mm-stem-to-6mm-Barb-PM250806E.html one on either side of the push fit connector.

[Carl2009]

I've tried lots of hoses and the best I find is Streamline's Lite 5. It's a braided hose that remains completely supple even in minus conditions. Lasts for ages but, as with most things, it aint cheap.

http://www.varitechsystems.co.uk/node.php?id=414&catid=11

[♠Winp®oClean♠]

I've tried lots of hoses and the best I find is Streamline's Lite 5. It's a braided hose that remains completely supple even in minus conditions. Lasts for ages but, as with most things, it aint cheap.

http://www.varitechsystems.co.uk/node.php?id=414&catid=11

Crikey, can you still buy that stuff!! I used to use it years ago when Cleantech supplied it, may last long but weighs a tonne!