[dan hughes]

What size shnozzles do you use on 21lts machine whirlaway!?

Mine is set for 15ltr machine, I think 2525's

[Blast Away]

2 x 03's. 15 Degrees or 25 it's up to you.

[BDCS]

most arms are 1/4" but mossies are 1/8"

[dan hughes]

Thanks blast away !

[Matt Gibson]

Carl, you always get overlooked 

[dan hughes]

Thanks you very much Carl 

[Aqua Power Solutions]

Lee, Carl , I have just upgraded my pump today 21LPM 200 bar , it has 15035 on the mossie . Would i be better off with less spray angle on the nozzle ? Thankyou in advance Ed

[Blast Away]

What size Mozzy?

[chris scott]

Lee, Carl , I have just upgraded my pump today 21LPM 200 bar , it has 15035 on the mossie . Would i be better off with less spray angle on the nozzle ? Thankyou in advance Ed

Your already on 15*....and the holes too big. Buy lechler nozzles ...the cheap one wear out too quick and you loose pressure. Change nozzles every three months ...unless you do as much pressure washing as me...then you can change them every three years.

[Matt Gibson]

Im thinking of trying 25 degree nozzles in my whirlaway when i change em next.
Always used 15's

[Blast Away]

You want 2 x 03's really. With 2 x 035's you're loosing a little pressure to start with but allowing all flow though. With 2 x 03's you're forcing about 19-20 lpm flow through so more pressure which will blow your nozzles gradually until the 21lpm goes through.

Think of having duel suction inlets on either side of the pump, it's been proven that a 202 pump doesn't really draw 21lpm anyway from one suction inlet. We did it on ours and on a 30lpm pump.

[Aqua Power Solutions]

Sorry Lee, its a " 21" i have also a "12" and that is not my manhood !! Ed

[chris scott]

Sorry Lee, its a " 21" i have also a "12" and that is not my manhood !! Ed

How long have the nozzles been in ?
You are possibly only running about 165 bar thats near 20% down on power.

[Blast Away]

What engine is it?

[chris scott]

What engine is it?

11hp Honda

[Aqua Power Solutions]

They have just gone in today Chris so not tried them with the new pump.
Lee, Damian (Q services) put me a double inlet feed on for the 202 pump on GX390 . Youtube his conversion !
Not mechanical minded Lee so guess you would do your own. Ed

[chris scott]

They have just gone in today Chris so not tried them with the new pump.
Lee, Damian (Q services) put me a double inlet feed on for the 202 pump on GX390 . Youtube his conversion !
Not mechanical minded Lee so guess you would do your own on yours. Ed

You need 13/14hp to make that pump work properly.

[Aqua Power Solutions]

Chris, Thats it ...... Lets draw........Bang ....you've missed .... Now i am only going to say this once.......ITS 13HP !!!!!  
Now get on your horse and drink ya milk !

[chris scott]

Chris, Thats it ...... Lets draw........Bang ....you've missed .... Now i am only going to say this once.......ITS 13HP !!!!!  
Now get on your horse and drink ya milk !

Honda don't make 13hp engine.

[Matt Gibson]

Right, as for nozzles, in peoples experience, are 15 degree nozzles better in a whirl/mossy or do you guys use 25 degree?