Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

bobplum

  • Posts: 5602
40-40 membrane
« on: February 17, 2014, 10:04:26 pm »
i will need to start producing greater amounts of water is the 40=40 system the answer, if so can any one point me in the right direction to purchase one

many thanks
bob

deeege

  • Posts: 4994
Re: 40-40 membrane
« Reply #1 on: February 17, 2014, 10:09:36 pm »
Daqua offer great value and great customer service.

I purchased a 4040 from them around 18 months ago, still producing at the same rate as the day I bought it.
"....and it's lend me ten pounds, I'll buy you a drink, and mother wake me early in the morning."

dave0123

  • Posts: 3553
Re: 40-40 membrane
« Reply #2 on: February 17, 2014, 10:12:20 pm »
gaps water you can buy a kit with everything you need to set it up with instructions.. and june will recommend whats best for you
Dave.

jk999

  • Posts: 2079
Re: 40-40 membrane
« Reply #3 on: February 18, 2014, 12:04:50 am »
Got my 4040 from vyair was the cheapest I found by a couple of 100 pounds and they threw me an 11 inch di vessel in full off resin , can get roughly 1000 litre s in just over four hours

Re: 40-40 membrane
« Reply #4 on: February 18, 2014, 05:42:38 am »
Vyair for me too
They can do you a whole kit or just the parts you need , like most other suppliers, at very competitive prices.

jk999

  • Posts: 2079
Re: 40-40 membrane
« Reply #5 on: February 18, 2014, 08:06:58 am »
I got three twenty inch housings  with filters 4040 stainless ro housing with membrane and 11 ltr resin vessel filled with resin for 457 all in with delivery all other companys was  about 600 plus

bobplum

  • Posts: 5602
Re: 40-40 membrane
« Reply #6 on: February 18, 2014, 04:13:55 pm »
I got three twenty inch housings  with filters 4040 stainless ro housing with membrane and 11 ltr resin vessel filled with resin for 457 all in with delivery all other companys was  about 600 plus

FROM VYAIR?

jk999

  • Posts: 2079
Re: 40-40 membrane
« Reply #7 on: February 18, 2014, 11:53:43 pm »
Sorry bob only just seen this yes from vyair  ordered it 7th jan got it on the 9th two days later, ive used 300 gpd ros for last 14 years  this is the best by far

bobplum

  • Posts: 5602
Re: 40-40 membrane
« Reply #8 on: February 19, 2014, 04:40:06 pm »
thanks guys
been in contact with vyair, next day had a water pressure gauge delivered to my door so i could test the pressure, from vyair.
The pressure is a tad under 40 psi, vyair waiting on delivery of some new low pressure membranes next week so they are going to put together a unit for me, trying to get away with out using a pump, will let you know the outcome

Spruce

  • Posts: 8434
Re: 40-40 membrane
« Reply #9 on: February 19, 2014, 08:20:30 pm »
thanks guys
been in contact with vyair, next day had a water pressure gauge delivered to my door so i could test the pressure, from vyair.
The pressure is a tad under 40 psi, vyair waiting on delivery of some new low pressure membranes next week so they are going to put together a unit for me, trying to get away with out using a pump, will let you know the outcome

Bob,

please make sure that the membranes are actually low pressure ones. Doug from Daqua did say on a recent post somewhere that Vyair don't sell a true low pressure membrane. They stock Amfor 4040 membranes.

Our water pressure is low like yours and the HF5 works fine without a booster pump.
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

bobplum

  • Posts: 5602
Re: 40-40 membrane
« Reply #10 on: February 19, 2014, 10:12:49 pm »
thanks for the heads up