This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Lee Pryor

  • Posts: 2287
Att Peter Fogwill re aqua tap
« on: February 13, 2014, 10:17:16 am »
Hi Peter

We got 2 of these to try this week and my first impression was they look very good. My chaps have been out with them a day or so now and are feeding back to me that its just to easy for them to turn while cleaning. They say that if the turning action was stiffer they would be spot on.

Have others said the same? If so is it possible to make a stiffer version? I have told my staff to give it more time and see and generally I like the product.

Anyone else having this problem?
Logged
The best way to predict the future is to create it.

Peter Fogwill

  • Posts: 1415
Re: Att Peter Fogwill re aqua tap
« Reply #1 on: February 13, 2014, 10:43:47 am »
Hi and thanks for the feedback. They will tighten up some say after a week of use. 
I am assembling them slightly different now whereas they will be tighter from day one. 
Its just some silicon grease on the O rings that will wear off. You could open it up and remove the grease yourself if you wanted?

Any problems or questions phone me on 07751964450
Logged

stevon

  • Posts: 126
Re: Att Peter Fogwill re aqua tap
« Reply #2 on: February 13, 2014, 11:16:55 am »
how do you open them up.?
Logged

Michael Peterson

  • Posts: 1741
Re: Att Peter Fogwill re aqua tap
« Reply #3 on: February 13, 2014, 12:35:23 pm »
He's right it takes about a week lee they get much nicer.
Logged

Peter Fogwill

  • Posts: 1415
Re: Att Peter Fogwill re aqua tap
« Reply #4 on: February 13, 2014, 03:51:37 pm »
You just pull out the two little silver pins.  Put it in the middle and clamp a set of mole grips on the pins and move slightly back and forth as you pull the pins. Or send them to me and I will give you replacements which are already a bit tighter.  If you are going to do it yourself wash with soapy water taking the orings out and cleaning the O'rings and the groove they sit in, and also the inside of the large plastic piece where the disk is.

Peter
Logged

stevon

  • Posts: 126
Re: Att Peter Fogwill re aqua tap
« Reply #5 on: February 13, 2014, 04:52:52 pm »
thanx peter will give it ago.
Logged

stevon

  • Posts: 126
Re: Att Peter Fogwill re aqua tap
« Reply #6 on: February 14, 2014, 04:54:47 pm »
took the metal pins  out ,washed inside with washing liquid 2 take grease off.put back together,much better.
Logged

brad t

  • Posts: 121
Re: Att Peter Fogwill re aqua tap
« Reply #7 on: February 14, 2014, 05:00:24 pm »
Do you still need the hose on the outside? Or can they be used with the hose inside.
Logged

stevon

  • Posts: 126
Re: Att Peter Fogwill re aqua tap
« Reply #8 on: February 14, 2014, 05:15:37 pm »
you can have hose inside or outside.(prefer inside though.)
Logged

Peter Fogwill

  • Posts: 1415
Re: Att Peter Fogwill re aqua tap
« Reply #9 on: February 14, 2014, 06:30:25 pm »
Like I said this new batch I am assembling at the moment will be tight from the start.

Anyone with the hose on the outside its advisable to cable tie the hose against the top of the pole to stop a pull on the connector.

Peter.
Logged

oldman

  • Posts: 487
Re: Att Peter Fogwill re aqua tap
« Reply #10 on: February 14, 2014, 06:58:06 pm »
Peter, is the AquaTap compatible with the Gardiner QuicK-LoQ system .
Logged

Peter Fogwill

  • Posts: 1415
Re: Att Peter Fogwill re aqua tap
« Reply #11 on: February 14, 2014, 09:14:10 pm »
Quote from: oldman on February 14, 2014, 06:58:06 pm
Peter, is the AquaTap compatible with the Gardiner QuicK-LoQ system .

If you get the pole top from Gardiner and a No 1 clamp, I could give you the other part you need.
Logged
Pages: [1]