[Smurf]

Can anyone recommend a good pressure washer hot box to get?

[BDCS]

Personally I have a couple of Lavors which have never been any grief - its the components around them that fail, flows switches in particular 

[Smurf]

Cheers bud... what do think of a lavor volcano are they any good?

[BDCS]

That's fine but its just in a big box, I have the Lavor boiler in an Exchange box - again a very big box. I now have just a simple boiler, small frame, minimal plumbing with a remote tank which is all bolted to my trailer. If you have the room then it would be fine for sensible money - there are second hand machines. Where are you ?  

[Smurf]

I've been mulling over to build a trailer/van mount but to be honest I do like the idea of a hot box being portable. Same as the washer I use so can use them static or portible dependant on the job in hand.

What do you think?

[BDCS]

I have a hot 21 ltr trailer and portable hot 15 ltr machine. Also about 5 other washers for gutters and washing the bike etc. I have about 65 m of hose on the trailer so I can get most things. 95 on the jetter

[Smurf]

What jobs do you find work best using hot/steam as I've never used a hot box before so any advice would be much appreciated

[BDCS]

Any job that involves paint removal and degreasing mostly. Anything else would be done with cold with the help of the odd chemicals

[G O Cleaning]

gum

[BDCS]

Thats true - I never tend to use the PW on gum because there never seems to be any water on the sites. I usually use the Osprey on gum

[Smurf]

I'm looking at getting into masonry cleaning using low pressure steam cleaning which doesn’t damage the substrate that high pressure cold jetting would do.

What do you think of this as I know it’s just a boiler on a cart attached to a lower psi & flow rate pump than I currently use but does look the dogs nuts.


http://restorative-products.com/thermatech/

[chris scott]

I'm looking at getting into masonry cleaning using low pressure steam cleaning which doesn’t damage the substrate that high pressure cold jetting would do.

What do you think of this as I know it’s just a boiler on a cart attached to a lower psi & flow rate pump than I currently use but does look the dogs nuts.


http://restorative-products.com/thermatech/

It's the best on the market... http://cleaning-service.uk.com/concrete-and-brick-cleaning/

[Smurf]

Nice site Chris

What's the difference with a doff system and the one you use?

[BDCS]

Here we go ! 

[chris scott]

Best phone me . 
I feel victimised on here 

[Smurf]

Cheers Chris...

Sorry I don't understand why you fell victimised as I only asked relevent queston's as I've  been looking at different hotbox's avalable on the net that's all.

Have I missed another post or something?

[BDCS]

It would probably be less depressing if you ring the Samaritans.

[chris scott]

It would probably be less depressing if you ring the Samaritans.

See victamised

[Smurf]

Indeed 

It would probably be less depressing if you ring the Samaritans.

See victamised

[Smurf]

Anyhow is this a forum to ask question bdcs or should I just phone a friend instead.   

By the way thanks for your help bdcs as I've almost forgotten I'm was on ciu until you reminded me.