[PurefectWindowCleaning]

Word on the street is that Protecter kote can only be used on metal, what do you use for wood and where is best to buy it from? I shall be working on this tomorrow so internet is not an option.

[PoleKing]

Just regular floor paint bud.
B&q et al sell it.
You want a few coats in traffic areas.
For grip stick some sand in it.
I've got an unopened tin here if you're not too far, you're welcome to it.

[deeege]

I protectakoted my vans ply lining 4 years ago. It's still as good as new now.

[PurefectWindowCleaning]

Cheers Darren, bit far away tho bud 

Deege - its fine on wood then is it.

[Clever Forum Name]

Don't know who's told you that? It will chip easier but seen plenty of
Vans with painted floors with protecta kote

[PurefectWindowCleaning]

Don't know who's told you that? It will chip easier but seen plenty of
Vans with painted floors with protecta kote

Read it on here somewhere...

Ill go out early doors then buy some.

Did you get your pole clamp things from bnq? I need to get some and make a hole in the bulkhead for my pole

[Clever Forum Name]

The company who made em went bankrupt lol

Trying to find another manufacture for tony Edwards on here.

[H20cleaning]

just do exactly what PURE h20 has done, paint your wood with whatever you like and then buy a plastic boot tray for hoses and cloths. That way the paint should last a lot longer without chipping.

keep in mind when your kitting your van out to make sure everything you hang ( e.g poles, bottles, ladders) are all secured well so you don't have things bashing around! I HATE rattles and knocks when im driving it makes me paranoid.

also find a way to keep your hose reel secure whilst on the move, if your like me and lift it out each job I just use a bunjy to hold it in place.

last but not least we want to see progress so get a few photos in progress

[Lee.]

My friend has put safety flooring in his van. It just sits over the ply lining and is siliconed around edges, guess you could stick it to sides as well. It's the stuff they use in disabled wet rooms. Non slip very tough and looks really smart. Think it only cost him £30.00 don't know where you can source it though.
I am going to do it to my van soon and I have protects cited it already

[dazmond]

not much room in the back of that van mate now you ve got a bulkhead?

do you think you ll fit a tank in their mate or are you going back to trad?

[Fin Clearview]

The most important thing to do is fill in any gaps in the flooring, you don't want water getting under it where you can't see and where its unprotected. My advice,  take the ply out and protekta etc

[PurefectWindowCleaning]

not much room in the back of that van mate now you ve got a bulkhead?

do you think you ll fit a tank in their mate or are you going back to trad?

Ha, the photo is a bit decieving Daz, nice amount of room to work with. 

[mikeyfaerosyth]

I would take the floor and arches up and store it away,looks too nice to paint.

Then order protectocote to seal properly,set up the van tempereraly until done.

And dont put wood back.

[David Kent @ KentKleen]

DIAMOND HARD WOOD PAINT!

[trippyboy]

Rip the ply bed out,water will get thro any joints and start to rot the metal floor underneath

[PurefectWindowCleaning]

Out of curiosity, how much water do you guys spill/leak? 

My system is more or less completly water tight, and never over fill lol

I know its best to be safe than sorry, just wondering