Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

sglods

ro 4040 high volume purefreedom free standing
« on: November 19, 2013, 07:59:34 pm »


2400 GPD High Volume Reverse Osmosis System (40" Membrane)

2400 GPD High Volume Reverse Osmosis System (40\" Membrane)2400 GPD High Volume Reverse Osmosis System (40\" Membrane)2400 GPD High Volume Reverse Osmosis System (40\" Membrane)2400 GPD High Volume Reverse Osmosis System (40\" Membrane)2400 GPD High Volume Reverse Osmosis System (40\" Membrane)


Our new high volume reverse osmosis systems are designed for the high end user requiring large amounts of water in a short time.

We believe these to be the best value for money there is for an industrial quality purification system. Directly comparable in quality, capacity and efficiency to the 'big name' systems.

Benefits of these systems include:

Compact Design
Ideal for hard water areas
Free Standing - does not have to be wall mounted
Very easy to use and maintain
Comprises of off the shelf filters and housings - can be replaced with filters from other manufacturers.
Easily portable
Very good production rates from high quality membranes
Includes a 6.5 litre deionisation unit to make 100% pure water - 000 TDS
High quality water output
Cost effective from day one
Manufactured by us in-house
Fully assembled and ready to work out the box
Each 950 GPD unit includes the following:

2 x 20" Reverse Osmosis Prefilters and Housings
1 x 40" HF4 or HF5 high quality Reverse Osmosis Membrane and Champ Housing
Choice to add industrial standard, mains powered, IP5.5 rated booster pump
1 x Glycerine FiIlled Pressure Gauge
1 x 6" x 18" (6.5 Litre) Deionisation Unit filled with Tulsion brand Deionisation Resin
All metal powder coated stand and frame
As with all reverse osmosis systems to get a good production rate and waste to pure ratio, good inlet water pressure is required. If your mains water pressure is not high enough a booster pump can be fitted which will allow the membrane to run at it's peak performance. The booster pumps we supply are all continuously rated meaning there is no 'down time' to allow the pump to cool. The booster pump we supply with this system is an industrial quality 230V vane pump matched specifically in terms of flow rate and pressure to the task at hand. It is also IP5.5 rated meaning that is is safe to use in an environment where water splashes are likely to occur, and in addition to this we fit and RCD plug to give extra protection to the user.

We cannot stress enough the benefits of installing a booster pump in your RO system - Pure water production increases massively, a waste to pure ratio of 1:1 can often be achieved and the output TDS of the membrane drops significantly thereby increasing the life of your DI resin.

We have included options for both HF4 and HF5 membranes. These are both very highly regarded in the water purification industry however the HF5 is able to produce similar volumes to the HF4 at very low water pressure.

HF5 40" - 9456 Litres per Day (2400 GPD) @ 80psi

£400 . ono inc dev

p1w1

  • Posts: 3873
Re: ro 4040 high volume purefreedom free standing
« Reply #1 on: November 19, 2013, 08:45:35 pm »
 ??? are you selling a new one or second hand, if second hand how old is the membranes what comes with it etc

sglods

Re: ro 4040 high volume purefreedom free standing
« Reply #2 on: November 20, 2013, 12:21:43 pm »
sold  ;)

many thanks