[JSMC]

what is the best way to get angle adaptor onto these poles so brush can be attached?

[DG Cleaning]

Do a YouTube search, all will be revealed

[bobplum]

what is the best way to get angle adaptor onto these poles so brush can be attached?

if we are talking about the plastic bottom of the angle adapter on to the screw/ thread section of the pole then warm it up over a flame ( candle, cooker ring) and then screw it on the plastic form around the screw thread

[JSMC]

done that with last one and worked a treat. This time it sorta melted lol

[JSMC]

think i need a new end cone lol. anywhere sell them online ?

[gary999]

cut off end of the harris pole...take a screw end out of cheap
broom/mop stick that angle adapter will naturally screw on.

push fit broom/mop screw into harris pole opening

more secure fit either tape or drill through pole and attach
with nut and bolt

[stuart mc]

I am bound to have one lying around somewhere, if not I will have a one where if you drill out the metal bit at top of pole, wrap a bit of tape round pole, then attach the angle adapter, you can buy this part, flip knows where though, but I definitely have one or two, but anyway I will have a cone somewhere if you want it just ask

or just do what garry says, that works as well

[JSMC]

self tappers then guys? seems the best way i reckon.


stuart ye happy with big tel ?

[Mist A Bit]

to much hassle, to buy the purpose made pole isnt expensive a clx 18 is half a days earnings.

[dannymack]

Just buy small wfp not that expensive !!!!

[stuart mc]

self tappers then guys? seems the best way i reckon.


stuart ye happy with big tel ?

delighted mate, but time will tell

[Ian Lancaster]

what is the best way to get angle adaptor onto these poles so brush can be attached?

Gardiners used to stock Pole End Screws in two diameters - we use them in Unger telescopic poles.

Couldn't find them on their website but may be worth a phone call.

[gary999]

to much hassle, to buy the purpose made pole isnt expensive a clx 18 is half a days earnings.

harris pole..is on average a half hour of earning

[jarvy]

I pop riveted mine when I had one,less chance of hose snagging on the ends of screws and putting a hole in it.

[JSMC]

self tappers then guys? seems the best way i reckon.


stuart ye happy with big tel ?

delighted mate, but time will tell

reckon he will be good for your club. When do you think he will head over to the tax dodger arena?

[stuart mc]

self tappers then guys? seems the best way i reckon.


stuart ye happy with big tel ?

delighted mate, but time will tell

reckon he will be good for your club. When do you think he will head over to the tax dodger arena?

when they realise that ally is a fe cking muppet, who has no idea and has to manage a real budget probably, but hey he was pretty good to ICTFC and turned down jobs because he liked Scotland, so maybe cash is not his number 1 priority, who knows, we will see, hope he sticks it, if he has ambition though, he really should avoid the tax evaders like the plague

[JSMC]

did you find any nose cones?

[windymiller]

matt used to have a website explaining it all, dont know if its still up. google diy water fed pole

[robertphil]

for trad use to make the bottom end of a Harris last longer i drill a 1/8 hole right thru about 1/4 inch up from the base and put a thin bolt n nut  thru the pole.    on the middle of the bolt (inside pole )i slide on about 8  small pieces of squeegee rubber

this acts as a buffer when you close up the pole

[JSMC]

i have in the past used hea ton the nise cone and wound the crank on. this one is now damaged.