[simbo]

Hi all,
fitted up my ro today 75 gallon, now i am sure its working ok as water tds in is about 540 and water out not through di is around 40 and dropping slowly, very very slowly.
Now the waste water is flowing at a good rate and clean water is just a fast drip, hardly anything for 3 hours. I have looked at past posts and seems my water pressure is low and my flow rates are around the wrong way, I am not really wanting to keep on spending on this as costs are mounting but does anyone have any ideas on increasing pressureand if not and i have to get pump from ro-man will i have to buy battery aswell to run it, having been off work for over a week now with broken ribs need to cut costs somehow, any help would be very welcome as this is my final hurdle on diy system all else ready to go now, apart from ribs that is
cheers simb0

[VIP Aussie]

Hey Simbo

I am an Aussie, looking to set up RO sytems for ourselves, or maybe straight DI as our water is very soft.

Can you help me understand the components you have fitted and where you sourced them ?

Perry

[simbo]

perry
i am new to this aswell but, 75 gallon ro filters available from ro-man on the internet you will also need the di cylinder around £27 tds meter and would recomend a inline pump aswell £72 just hook up to outside tap ask for connectors to do this and if your lucky pure water comes out into your water tank. If my water was really soft i would have gone di only as will not use that much but ro is still the cheaper option
cheers simb0

[windows_chepstow]

Simbo,

I think this would get a better response if you re-posted it on the main forum.