Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Griffus

  • Posts: 1942
TDS in tank too high after changing membrane..
« on: August 31, 2013, 12:01:35 am »
Changed the RO Membrane last week as the TDS in the tank was coming out above above 50.

New Membrane in place, a good few pound lighter in the pocket, but the TDS is still 40+.

Tap water hovers around the 250 mark.

What have I got to do to get this down to around 20, which is what I'd hoped I'd easily achieve with the new membrane.

dave0123

  • Posts: 3553
Re: TDS in tank too high after changing membrane..
« Reply #1 on: August 31, 2013, 12:12:36 am »
are you using a booster pump?
what is your tap pressure?
what is the water flow from your tap per min?
what membrane did you buy?
what ro do you have?
Dave.

Griffus

  • Posts: 1942
Re: TDS in tank too high after changing membrane..
« Reply #2 on: August 31, 2013, 12:36:41 am »
are you using a booster pump?
what is your tap pressure?
what is the water flow from your tap per min?
what membrane did you buy?
what ro do you have?

No
Never been a problem, good and strong although I haven't gauged it
Around 8 - 10 litres
http://www.thecleaningwarehouse.co.uk/20low-pressure-reverse-osmosis-membrane-933-p.asp
AXEON PVC RO Membrane Housing 4" x 21" (Champ 4021) (Brodex 250RO system)

chez

Re: TDS in tank too high after changing membrane..
« Reply #3 on: September 01, 2013, 03:28:59 pm »
Did you flush it first for a few hours? I think it needs this first.

Griffus

  • Posts: 1942
Re: TDS in tank too high after changing membrane..
« Reply #4 on: September 02, 2013, 11:01:24 am »
Did you flush it first for a few hours? I think it needs this first.

First hour or so.

Still not great, in at 40.

Will take apart a bit later and reassemble but red0 the silicon grease on the seals.

Failing that it's a swap I think.


Crystal-clear

  • Posts: 3029
Re: TDS in tank too high after changing membrane..
« Reply #5 on: September 02, 2013, 11:35:38 pm »
griffus it might be pressure ? also boosters are the way forward but try a good flush  ???

C.C.S.

  • Posts: 954
Re: TDS in tank too high after changing membrane..
« Reply #6 on: September 03, 2013, 04:31:06 pm »
is it me or there are more and more problems with new membranes.aren't they up to standard anymore?i had the same problem .only lasted 1 year before the ppm went to 50+ and before that i used an older one for a lot longer.