[Mr Sparkle]

Been cleaning the last few days with a tds of 30.
Only just checked the tds and my own fault thought it was fine as not long changed the resin,
Will they leave all marks with 30 tds?
Not had anyone phone up complaining yet,
Touch wood will be ok.

[Smudger]

A good chance you will have some spot, factors are how much you rinse, weather or not you usually clean the frame and if it was hot and sunny,  on your side (hopefully) is that most customers are regulars and you've been cleaning them for a while, they most likely wont be checking that closely, and many will forgive a dodgy clean here and there but if you get a complaint go out and reclean ASAP

Darran

[Mr Sparkle]

Thanks for advice, Yes most are regulars so hopefully will be ok.
Never cleaned with a tds as high as 30 before so bit nervous

[colin purewater]

Nowt wrong with30

[Mr Sparkle]

Seriously colin?
Wont it leave spots?

[PoleKing]

Nowt wrong with30

Colin NOTSOpurewater

[roundbuilder]

I wouldnt worry mines at 32 gonna change it weekend.

[wfp master]

Tap waters fine.

[gavinb]

Ive cleaned with 50+ for a whole week and didnt get 1 complaint !

[Carl@Cwc]

Are u guys seriously cleaning with 30tds ??
My backside drops out at 2tds lol

[♠Winp®oClean♠]

30 will be fine.

Cleaned with 54 yesterday & first job this morning!

Gave the vessel a shake to finish the day off with 006. I inspected the first job & on the odd window I could make out the odd faint water spot but nothing anyone else would notice.

Changed resin when I got home. Tulsion has become pants, I'm going back to Dowex.

[windiewasher]

Tap waters fine.

+1
used tap water all day again today.

[colin purewater]

Until this week
I've been using 052 for about 4 months

Perfect results

As long as it goes though some sort of ro
It fine

[Jim Waugh(Albright & Shiny)]

Its alright for you boys. Where I am is near to a whole load of limestone quarries, The result is that everything gets covered in a fine cement like dust.. Its a flipping nightmare for spotting.. TDS 000 or nothing…

[dazmond]

my tap tds is 30-35 so am i wasting money even buying resin?

are you guys really confident that the windows are coming up clear and spot free?

and why do some of you seem careless when it comes to purifying water?

ive gone up to 015 before changing resin but not any higher.


regards


dazmond

[♠Winp®oClean♠]

my tap tds is 30-35 so am i wasting money even buying resin?

are you guys really confident that the windows are coming up clear and spot free?

and why do some of you seem careless when it comes to purifying water?

ive gone up to 015 before changing resin but not any higher.


regards


dazmond

Try it. Clean your own windows with tap water.

I wouldn't use 54 normally, I got caught out- Tulsion MB115 just doesn't seem to be what it used to

I would happily clean with 20-30  on a regular basis though.

[Paul Coleman]

I've got a feeling some of these posts are wind-ups  .
The real test is looking at the "clean" glass from inside on a bright day.

[windiewasher]

Why do people use resin if you can get it out your ro at less than 20?

[dazmond]

i always use tulsion resin and i havent noticed it being used up more than normal.i use two 25kg bags a year roughly.

me personally wont take notice of the guys that are cleaning with 54 tds!colin "purewater" although i also think he s joking!!!

[♠Winp®oClean♠]

I'm certainly NOT joking!

54 parts per "MILLION" it's not milk is it!

OK, it's not ideal but it ain't gonna have you in major trouble either.

As said, I'd happily clean with 30ppm & have done many times without issue.

Some people maybe need to look at things logically instead of being "sheep"