This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

andyralph

  • Posts: 361
any advice please
« on: August 04, 2013, 12:20:25 pm »
hi all useing a merlin at the moment need to get a new ro  system any ideas or advice on best one to use thanks andy

goldoak

  • Posts: 36
Re: any advice please
« Reply #1 on: August 04, 2013, 12:22:39 pm »
bin it,
get a 4040 hf5

andyralph

  • Posts: 361
Re: any advice please
« Reply #2 on: August 04, 2013, 12:40:22 pm »
best place to buy one from cheers

DeLuce

  • Posts: 1153
Re: any advice please
« Reply #3 on: August 04, 2013, 02:44:40 pm »
If you don't fancy going down the 4040 route, then Purefreedom do an RO system from the 300s to 450gpd. Depends if you have a big round where you're drawing off your water every day of the week then maybe a 450gpd won't keep up.
I've had my Purefreedom Ro setup for a few years now and its been very reliable.

Flash..

  • Posts: 404
Re: any advice please
« Reply #4 on: August 04, 2013, 03:13:51 pm »
Whats wrong with a Merlin, fills my 650l tank every night in a couple of hours although the waste water is a little high, ; if your on a meter ;)

Jim Waugh(Albright & Shiny)

  • Posts: 559
Re: any advice please
« Reply #5 on: August 04, 2013, 09:21:25 pm »
I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

andyralph

  • Posts: 361
Re: any advice please
« Reply #6 on: August 05, 2013, 11:32:50 am »
how mch waste water do u get

formb

Re: any advice please
« Reply #7 on: August 05, 2013, 01:09:02 pm »
Quote from: Jim Waugh
I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Ha.

Google translate:

It's testicle Dog!!!

andyM

  • Posts: 6100
Re: any advice please
« Reply #8 on: August 05, 2013, 01:11:42 pm »
Quote from: Jim Waugh
I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Ha.

Google translate:

It's testicle Dog!!!

He has a dog with one ball?  ???
One of the Plebs

Spruce

  • Posts: 8454
Re: any advice please
« Reply #9 on: August 05, 2013, 01:17:49 pm »
As a single operator a 4021 will produce more than enough water for your daily requirements, especially if you process water into an ibc tank.

http://www.daqua.co.uk/ro_systems.htm

Merlins are renowned for a high water waste and poor membrane efficiency. My mate down the road has had 2 Merlins. They produce water fast but his has a waste to pure of about 5 to 1 and both of his Merlins have never achieved more than a 90% rejection rate which equals higher resin costs.

We have a 4040 now which keeps up with the 3 of us drawing from it.
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

andyralph

  • Posts: 361
Re: any advice please
« Reply #10 on: August 05, 2013, 03:13:09 pm »
hi spruce is yours a 4040 hf5

Jim Waugh(Albright & Shiny)

  • Posts: 559
Re: any advice please
« Reply #11 on: August 05, 2013, 03:25:53 pm »
Quote from: Jim Waugh
I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Ha.

Google translate:

It's testicle Dog!!!


He has a dog with one ball?  ???
Thats my uneducated attempt at Its the dogs Bolleaux in french… … lol lol