[PAUL ERITH]

As title says what Gardiners brush would you choose for gutters and fascia cleans ?

I like the look of the stiff sill brush i didn't like the super light cladding brush due to no splay.

Thanks Paul

[ben M]

http://www.gardinerpolesystems.co.uk/acatalog/the-super-lite-xtreme-standard.html

[Darren Spreadbury]

I have the stiff sill brush and I think it's too stiff, I also have the soft sill brush its better but a little soft so I would go for the medium .

[Flash..]

Dual trim medium sill brush for me same as I use on windows, great for getting up under guttering etc

[Trev Jones]

I use

http://www.gardinerpolesystems.co.uk/acatalog/the-super-lite-radius-sill-brush-flat-trim-medium-bristles-white.html

these seem to work best for me.

[colin purewater]

White sill brush gets in all the nooks and cranies 

[ben M]

White sill brush gets in all the nooks and cranies 

too heavy 

[Mike #1]

http://www.gardinerpolesystems.co.uk/acatalog/the-super-lite-xtreme-standard.html

+1 best brush for the job good scrubber and lightweight makes gutter cleans so much easier . Mike

[andyM]

I use an old superlite white mono brush, that has reasonably stiff bristles fitted with fan jets.
Im happy with it, I've done some really filthy gutter/fascia jobs with it and that brush has always removed the dirt and mould with ease.
A good brush that I've had for more than 2 years and never looks battered.

[dazmond]

i use a medium radius sill brush with normal angle adaptor.great for getting into the nooks and crannies and light for a sill brush.i also use this brush for conny roof cleans on a 55 or 90 degree gooseneck.

[Dave Willis]

I've been using the red sill brush but it leaves bright red bristles in the brackets 

Maybe white won't show so bad - even had to get the ladders out to pull them off.

[Frankybadboy]

- even had to get the ladders out to pull them off.

did know you was like that dave

[Positivity]

It's not a Gardiner's brush but the fittings are all compatible even the taper screw socket and you even get a telescopic pole with it -  for less than a fiver from Home Bargains and it's great for that "awkward" bit of fascia behind the gutter and the back of the gutter where a normal brush can't get in.
You will have to drill to get the pole hose in but hey - it works!!!!!!

[andyM]

It's not a Gardiner's brush but the fittings are all compatible even the taper screw socket and you even get a telescopic pole with it -  for less than a fiver from Home Bargains and it's great for that "awkward" bit of fascia behind the gutter and the back of the gutter where a normal brush can't get in.
You will have to drill to get the pole hose in but hey - it works!!!!!!

That brush looks like a Don King Toupee.....

[richard jagger]

+1 on the above brush I also made one a few years back and still the best brush for gutters.

[PAUL ERITH]

Thanks for all the replys i have just ordered a extreme stiff brush with 1.4mm pencil jets from gardiners

Thanks Paul