[Swcs]

So my pump decided to give up on me today. Yay!  

My previous set up consisted of one flo-jet pump, connected to half inch hose with a hoselock stop end, then had a splitter to 2 half inch hoses which went to the reels.

One issue I had when working with this set up is when you both turn your flow valves off after rinsing, the back pressure can cause the hose to pop off the hose reel.

also other problems I had was the flow being too weak with both rinsing off.

To those who have a 2 man set-up, how do you do it? and what pump is best?

Thanks!

[Don Kee]

So my pump decided to give up on me today. Yay!  

My previous set up consisted of one flo-jet pump, connected to half inch hose with a hoselock stop end, then had a splitter to 2 half inch hoses which went to the reels.

One issue I had when working with this set up is when you both turn your flow valves off after rinsing, the back pressure can cause the hose to pop off the hose reel.

also other problems I had was the flow being too weak with both rinsing off.

To those who have a 2 man set-up, how do you do it? and what pump is best?

Thanks!

2 pumps off one feed....
Put your splitter before the pumps and have each reel having its own separate pump.
Use brass hose locks aswell, rarely pop off