Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Shaun_Ashmore

  • Posts: 11382
Woodbridge Promount problem
« on: July 22, 2013, 08:09:03 pm »
When I start my promount it isnt going to full power when the throttle is on full, infact its labouring, It's got fuel LPG it has oil and the dirty water tank is clean so I dont think its a cut off, any ideas ? these machine are as simple as me so I'm hoping its a simple fix.

Shaun
Logged

Paul Moss

  • Posts: 2296
Re: Woodbridge Promount problem
« Reply #1 on: July 22, 2013, 08:21:15 pm »
Have you tried removing air filter to see if there is a difference, if not it could be the regulator.
Logged

richie

  • Posts: 1179
Re: Woodbridge Promount problem
« Reply #2 on: July 22, 2013, 09:00:09 pm »
Check air filter
Check fuel filter


If the above dont work then it could be back pressure from the HX....to check unbolt the exhaust from the HX and run the machine.  If it runs up to speed then have the HX checked for blockages.  Also it could be a problem with the govenor on the engine.
Logged

Paul Moss

  • Posts: 2296
Re: Woodbridge Promount problem
« Reply #3 on: July 22, 2013, 09:07:42 pm »
Richie, it wont be fuel filter, its running on gas :D
Logged

richie

  • Posts: 1179
Re: Woodbridge Promount problem
« Reply #4 on: July 22, 2013, 09:16:15 pm »
ahhh yeah my bad LOL
Logged

Paul Moss

  • Posts: 2296
Re: Woodbridge Promount problem
« Reply #5 on: July 22, 2013, 09:50:56 pm »
Shaun check your wiresto the fuses, one of them may be loose  ;D :P
Logged

Chris R

  • Posts: 813
Re: Woodbridge Promount problem
« Reply #6 on: July 27, 2013, 07:05:20 pm »
Try running on petrol? Show if its an lpg problem.
Remove vac hose from waste tank, it might be blocked? Sucked a towel up?
Change plugs and air filter.
Plug leads?
Logged
Staffordshire

Paul Moss

  • Posts: 2296
Re: Woodbridge Promount problem
« Reply #7 on: July 27, 2013, 08:17:16 pm »
Chris he has sorted it now, he was running it with 100 ft of pipe with the waste gate left open  ;D and wondered why he was no getting full extraction  :D
Logged

Shaun_Ashmore

  • Posts: 11382
Re: Woodbridge Promount problem
« Reply #8 on: July 27, 2013, 08:21:22 pm »
The real problem was that the water pump switch was knackered it was an intermittent fault.

Shaun
Logged
Pages: [1]