[David Wrightson]

Or this.....
http://www.tech-clean.co.uk/index.php/products/industrial-hot-pressure-washer-skid-mounted-hot-pressure-washers/

[Rob_Mac]

That is similar to mine.

Difference is mine is a 24HP engine and 35LPM. I was going to go for a 45 LPM pump but left it a little tight on the heater

Rob

[BDCS]

The jetter in my van sits on a pair of rails - take the exhaust off, two bolts and the whole shooting match lifts out. This is done every year to service and clean it - if it breaks down a loan machine would slide in to keep me working

[chris scott]

Or this.....
http://www.tech-clean.co.uk/index.php/products/industrial-hot-pressure-washer-skid-mounted-hot-pressure-washers/

250 bar at 21lpm *** from***£8000+vat Expensive!
14 Briggs ,ws252,gearbox,hotbox, whirl a way £2900 incl
I rarely use heat but the hot box ...gives me the option. Two machines will put 250 bar at 42lpm on the floor plus you always have a spare machine if the sh** hits the fan you can get the job finished albeit slower. 4 Hoses split into 10m sections so always have a spare. Weight is around 100kgs per machine .1000 litre ibc 50% full and two machines with hoses etc ,driver etc should be near limit.Taking into account the van will be 2000kgs.

[Roger Oakley]

Or this.....
http://www.tech-clean.co.uk/index.php/products/industrial-hot-pressure-washer-skid-mounted-hot-pressure-washers/

Cheaper version to the H&M, nothing wrong with that, except when you start putting this kind of kit on a trailer weight will become an issue, which has been spoken about before on here. Van mount is a better way to go, just check that you are legal, Chris will no doubt tell you the do's & don'ts though, and NO it is not another dig at you Chris, just that you like to help people that can't be bothered to do the research for themselves  

[BDCS]

Roger you were a haulage industry big hitter before you retired into deck chair refurbs

[G O Cleaning]

deck chair refurbs

 

[Roger Oakley]

Roger you were a haulage industry big hitter before you retired into deck chair refurbs

At one time, Carl, but used to put events together and have class 1 so would haul the things around europe when needed.

[BDCS]

That was my point 

[Matt Gibson]

The van set up ive got now is my perfect set up.. simples..

[David Wrightson]

Go on then......what's the spec  >:

[Blast Away]

Seen as though people are whipping their c**ks out.

Falch T3H. 21lpm @300 bar. Twin burner. F***in' hot!

[chris scott]

No competition   

[Blast Away]

Just debating whether to buff the hood or just get it carbon vinyl wrapped.

[Mike Halliday]

What spec is that pump? I think I have 2 of them in my shed, do you know the cost of them so I know the worth of mine

[Blast Away]

What spec is that pump? I think I have 2 of them in my shed, do you know the cost of them so I know the worth of mine

I don't know the price mate. But here's a link http://www.malcleanse.co.uk/speck-300-bar-21-lpm-pressure-washer-pump-np2521300-p-4108.html

[G O Cleaning]

Lee noticed on your facebook you said 30lpm 500 bar, was that a dif m/c  ?
 On your vid the skater wasnt removing gum did you still hav to spot ?

[Matt Gibson]

Go on then......what's the spec  >:

24hp Lombardini. Burner. Built in genny. Smallish tank. Shelving. Extra room for steamer/whatever. Trailer @ 30lpm run from a briggs and stratton petrol for any second jobs/bigger jobs.

Going to put a hotbox on the trailer for gum removal, and then maybe change it to lpg then ill have everything i want.

[trevor perry]

Seen as though people are whipping their c**ks out.

Falch T3H. 21lpm @300 bar. Twin burner. F***in' hot!

 How do you walk about with that between your legs Lee 

[Blast Away]

Lee noticed on your facebook you said 30lpm 500 bar, was that a dif m/c  ?
 On your vid the skater wasnt removing gum did you still hav to spot ?

Different machine mate yes. Not ours. We're doing all Manchester city centre public paving 5 nights a week for a national company and they've supplied us with 1 of 8 of their machines.

This one here https://www.youtube.com/watch?v=N19D3GlkVoc

It's not supposed to take the gum off too mate. Still need to spot gum. The way we work is scate at 500 bar on heat 100c max(really fast!!!), then split to 2 lances 15 each and rinse and spot gum. Currently cleaning King St in town.