This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

C.C.S.

  • Posts: 954
4040 ro membrane-high ppm
« on: July 15, 2013, 09:10:00 pm »
Hi all.i purchased a low pressure 40' ro membrane from daqua exactly one year ago .about 4-5 months ago the ppm began to rise from 18ppm (that's the lowest I could get out of it) to 25,35and now 45 ppm.i flushed it for 3 hours changed the 20''   prefilters and the same ppm,45.i thought I would get 2-3 years out of it before changing.could it be my luck and got a bad one? What kind of warranty do they normally came with? Maybe I should contact daqua first before spending £200 plus on a new membrane. What's he best place to buy from these days? Thanks

Scrimble

  • Posts: 2047
Re: 4040 ro membrane-high ppm
« Reply #1 on: July 15, 2013, 09:11:57 pm »
are you using a booster pump?

C.C.S.

  • Posts: 954
Re: 4040 ro membrane-high ppm
« Reply #2 on: July 15, 2013, 09:18:14 pm »
No I don't never did .the membranes is HF5 Axeon.
Also I use 1000-1200of pure a week.sometimes less

GoodFella2006

  • Posts: 413
Re: 4040 ro membrane-high ppm
« Reply #3 on: July 16, 2013, 12:27:22 am »
How often did you change the prefilters and what are they,sediment,carbon block etc?

C.C.S.

  • Posts: 954
Re: 4040 ro membrane-high ppm
« Reply #4 on: July 16, 2013, 08:27:26 am »
How often did you change the prefilters and what are they,sediment,carbon block etc?
I change them about every2-3 months.the filters are sediment filter and carbon block

Slash

  • Posts: 1875
Re: 4040 ro membrane-high ppm
« Reply #5 on: July 16, 2013, 07:47:07 pm »
That does'nt add up,is there any leaks etc.

Perfect Windows

  • Posts: 4179
Re: 4040 ro membrane-high ppm
« Reply #6 on: July 16, 2013, 09:05:26 pm »
Hi all.i purchased a low pressure 40' ro membrane from daqua exactly one year ago .about 4-5 months ago the ppm began to rise from 18ppm (that's the lowest I could get out of it) to 25,35and now 45 ppm.i flushed it for 3 hours changed the 20''   prefilters and the same ppm,45.i thought I would get 2-3 years out of it before changing.could it be my luck and got a bad one? What kind of warranty do they normally came with? Maybe I should contact daqua first before spending £200 plus on a new membrane. What's he best place to buy from these days? Thanks

If you take the membrane out of the pressure vessel, is the inside of the vessel slimy to the touch?  If so, you have bacteriological fouling and you need to replace the whole shebang (including filters) after taking out all the filters and membrane and running bleach through the system.

If it's like that and you just replace the membrane, you'll wreck that within three months (as I know to my cost).

Have a check and let us know then if it is slimy I'll tell you how I run the bleach through.

Vin

home6442

Re: 4040 ro membrane-high ppm
« Reply #7 on: July 16, 2013, 09:12:02 pm »
Has there been a rise in your tap tds ?

C.C.S.

  • Posts: 954
Re: 4040 ro membrane-high ppm
« Reply #8 on: July 16, 2013, 10:46:01 pm »
Thanks a lot guys.i'll try to open it tomorrow and see what's like inside.there is no leak as the system is in the shed and would have noticed .
I'll keep you updated. Cheers