This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

APWS

  • Posts: 179
turbo nozzle
« on: June 28, 2013, 04:25:00 pm »
my turbo has suddenly stopped spinning, it just squirts a thin jet out now,
is it knackered?
!! if it can get dirty it can get clean !!

Richy L

  • Posts: 2257
Re: turbo nozzle
« Reply #1 on: June 28, 2013, 05:15:48 pm »
It probably has dirt in it. If you have banged it or dropped it it may be cracked. If you can be bothered take it apart and take the spec of dirt out, or you'll have to buy a new one

Ged

  • Posts: 315
Re: turbo nozzle
« Reply #2 on: June 28, 2013, 06:40:28 pm »
sounds like it is done for. try using an in line filter in future which will prolong the life of the turbo. problem is you will need to clean the filter after about two hours because the filter clogs up and reduces the power of the turbo which is a pain but  you will be surprised how much grit it collects.

Rob_Mac

Re: turbo nozzle
« Reply #3 on: June 28, 2013, 08:18:32 pm »
Dependent on which turbo nozzle you have, spare ceramic inserts are available.

These do wear, you can crack them and if you press the trigger, whilst facing anything other than down, you can damage them by forcing the inner forward with the water supply.

We can get the spare kits, which are the ceramic end piece, a seal and the piece that spins, whatever that is called!!

Rob ;D

APWS

  • Posts: 179
Re: turbo nozzle
« Reply #4 on: June 29, 2013, 11:53:42 am »
thanks guys just bought a new one it's easier
!! if it can get dirty it can get clean !!