This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

LWC

  • Posts: 6824
Re: Minimum PSI for a WFP pump
« Reply #20 on: June 28, 2013, 10:15:44 pm »
Thanks, £20 for trolley, £20 reel which i attached with jubilee clips and i had hose lieing about. :)

home6442

Re: Minimum PSI for a WFP pump
« Reply #21 on: June 28, 2013, 10:25:31 pm »
Thanks, £20 for trolley, £20 reel which i attached with jubilee clips and i had hose lieing about. :)

Thanks for that.
John

DG Cleaning

  • Posts: 1726
Re: Minimum PSI for a WFP pump
« Reply #22 on: June 28, 2013, 10:42:04 pm »
30 psi might work in a backpack but if your van mount with 100m of hose it may struggle because of all the extra friction it needs to overcome.

Wrong sorry, this is how i use mine with 50m on it, and i have used it with 100m.



That's good to hear but if your going to use 100m of hose it sort of defeats the point of a trolley surely?

CleanClear

  • Posts: 14717
Re: Minimum PSI for a WFP pump
« Reply #23 on: June 28, 2013, 10:54:30 pm »
30 psi might work in a backpack but if your van mount with 100m of hose it may struggle because of all the extra friction it needs to overcome.

30psi is fine through 100m of hose we've used it with both 6mm and 8mm hose. Only issues where getting water to flow out at height i.e over that blackspot about 25 footish. PSI actually can work out to metre head and some pumps are quoted as this. Without going through all the jargon you can work out how high a pump can squirt water by its metre head figure (or equivalent PSI). Of course as you point out longer hose runs will mean the pump will have to work a bit harder, but they're still well able for two storeys using the setups we do.
*Status*--------Currently Online---------

DG Cleaning

  • Posts: 1726
Re: Minimum PSI for a WFP pump
« Reply #24 on: June 28, 2013, 11:09:44 pm »
30 psi might work in a backpack but if your van mount with 100m of hose it may struggle because of all the extra friction it needs to overcome.

30psi is fine through 100m of hose we've used it with both 6mm and 8mm hose. Only issues where getting water to flow out at height i.e over that blackspot about 25 footish. PSI actually can work out to metre head and some pumps are quoted as this. Without going through all the jargon you can work out how high a pump can squirt water by its metre head figure (or equivalent PSI). Of course as you point out longer hose runs will mean the pump will have to work a bit harder, but they're still well able for two storeys using the setups we do.

I did all this in college but I can't remember all the calculations involved. ;D
I'm an engineer by trade and I'd always go for the more powerful pump from a reliability stand point. 

CleanClear

  • Posts: 14717
Re: Minimum PSI for a WFP pump
« Reply #25 on: June 28, 2013, 11:26:27 pm »
30 psi might work in a backpack but if your van mount with 100m of hose it may struggle because of all the extra friction it needs to overcome.

30psi is fine through 100m of hose we've used it with both 6mm and 8mm hose. Only issues where getting water to flow out at height i.e over that blackspot about 25 footish. PSI actually can work out to metre head and some pumps are quoted as this. Without going through all the jargon you can work out how high a pump can squirt water by its metre head figure (or equivalent PSI). Of course as you point out longer hose runs will mean the pump will have to work a bit harder, but they're still well able for two storeys using the setups we do.

I did all this in college but I can't remember all the calculations involved. ;D
I'm an engineer by trade and I'd always go for the more powerful pump from a reliability stand point. 

Yeah you're probably right. We only got to try out the 30PSI ones for WFP because we had got some to supply jet washers and other stuff from our water tanks and then just tried them. We do have one in daily use. We got a pleasant suprise.
*Status*--------Currently Online---------

JamesAJF

  • Posts: 301
Re: Minimum PSI for a WFP pump
« Reply #26 on: June 29, 2013, 03:29:16 am »
yer u need a 100psi imo
bish bash bosh

Nathanael Jones

  • Posts: 5596
Re: Minimum PSI for a WFP pump
« Reply #27 on: June 29, 2013, 11:25:04 am »
Too much pressure just puts extra strain on your connections, drains more batter power & can cause hoses to bulge if you use hot water. I have a 100psi pump, but have adjusted the pressure switch down to 60 PSI.  ;)

Positivity

  • Posts: 571
Re: Minimum PSI for a WFP pump
« Reply #28 on: June 30, 2013, 09:33:59 am »
Thanks
Anyone in West Yorkshire got a pump for sale 100 psi preferably?
ive a brand new flo jet but im in Barnsley , where are you in west Yorkshire ?
you could go here if near leeds  airforce
                                                   airforce house
                                                   springwell rd
                                                   leeds
                                                   ls12 1bh
they have both shurflow and flojet pumps in stock . also do 2nd hand pumps , poles,  tanks ect .
d s
How much you want for the pump?
I'm 17 miles away and it's quite a nice drive except for some parts of Darton ;D ;D ;D ;D
07923442031

LWC

  • Posts: 6824
Re: Minimum PSI for a WFP pump
« Reply #29 on: July 03, 2013, 08:51:49 pm »
30 psi might work in a backpack but if your van mount with 100m of hose it may struggle because of all the extra friction it needs to overcome.

Wrong sorry, this is how i use mine with 50m on it, and i have used it with 100m.



That's good to hear but if your going to use 100m of hose it sort of defeats the point of a trolley surely?

Theres 50m on it now...its great to pull trolley up and you can literally get anywhere with it, trolleys can go most places and if it cant i just pull reel off.

I have a twin van mount and this for those awkward jobs.

Trevor62

  • Posts: 10
Re: Minimum PSI for a WFP pump
« Reply #30 on: July 07, 2013, 11:22:36 am »
30 psi might work in a backpack but if your van mount with 100m of hose it may struggle because of all the extra friction it needs to overcome.

Wrong sorry, this is how i use mine with 50m on it, and i have used it with 100m.





That's good to hear but if your going to use 100m of hose it sort of defeats the point of a trolley surely?


Your trolley looks both simple and practical, can I ask you where the pump/battery is on the trolley?   ???

LWC

  • Posts: 6824
Re: Minimum PSI for a WFP pump
« Reply #31 on: July 07, 2013, 08:06:28 pm »

Trevor62

  • Posts: 10
Re: Minimum PSI for a WFP pump
« Reply #32 on: July 08, 2013, 09:15:11 am »
Its a backpack mate, its all built in  ;)

http://legacy.shurflo.com/pages/new_industrial/industrial/gen_industrial/subcategories/ProPack.html

Ok, ic, good way to do it, but possibly a bit hard on the back if you are doing it day in day out.  :-\