This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

ben M

  • Posts: 4720
help connector
« on: June 24, 2013, 12:46:56 pm »
need a connector to adapt on my RO 4040 (bottom screw)
Which one do i have to buy please?

Thanks

Ben
Logged

ben M

  • Posts: 4720
Re: help connector
« Reply #1 on: June 24, 2013, 06:12:31 pm »
i said please  ;D
Logged

ben M

  • Posts: 4720
Re: help connector
« Reply #2 on: June 24, 2013, 06:32:46 pm »
Logged

bobplum

  • Posts: 5602
Re: help connector
« Reply #3 on: June 24, 2013, 06:48:27 pm »
when i looked straight away i thought 1/2 inch and then noticed on the pic it gives two options  and one is 1/2 inch

you can probably just get a copper 1/2 inch straight connection from a plumbing suppliers shop
Logged

ben M

  • Posts: 4720
Re: help connector
« Reply #4 on: June 24, 2013, 07:56:11 pm »
i need 1/2 inch, which one do you use guys?
Logged

ben M

  • Posts: 4720
Re: help connector
« Reply #5 on: June 24, 2013, 08:30:59 pm »
what do you use guys to connect your RO 4040 to the DI?
Logged

Smudger

  • Posts: 13439
Re: help connector
« Reply #6 on: June 24, 2013, 08:54:42 pm »
Your link gives 2 options but you have mentioned 1/2 inch
You can get any 1/2 inch bsp/ bspf/gas threaded horsetail off eBay or hire shops that deal in pressure washers or industrial vacuums or hydraulic suppliers such as pirteks

HTH

Darran
Logged
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

ben M

  • Posts: 4720
Re: help connector
« Reply #7 on: June 24, 2013, 09:03:08 pm »
Quote from: Smudger on June 24, 2013, 08:54:42 pm
Your link gives 2 options but you have mentioned 1/2 inch
You can get any 1/2 inch bsp/ bspf/gas threaded horsetail off eBay or hire shops that deal in pressure washers or industrial vacuums or hydraulic suppliers such as pirteks

HTH

Darran
Any link please Darran?
Logged

ben M

  • Posts: 4720
Re: help connector
« Reply #8 on: June 24, 2013, 10:24:40 pm »
maybe Alex Gardiner can help?
Logged

Alex Gardiner

  • Posts: 7742
Re: help connector
« Reply #9 on: June 24, 2013, 10:32:53 pm »
You would need one of these - http://www.gardinerpolesystems.co.uk/acatalog/john-guest-1-2-inch-push-in-fitting-to-1-2-inch-male-screw-bspt-thread.html
For use with John Guest tubing which is what I would recommend.

Or you could use these http://www.gardinerpolesystems.co.uk/acatalog/nylon-male-screw-thread-to-hose-barb-fittings.html you would need the 1/2" screw to 1/2" barb. This would be for use with 1/2" reinforced hose.
Logged

ben M

  • Posts: 4720
Re: help connector
« Reply #10 on: June 25, 2013, 09:36:41 am »
Thank you very much Alex  :)
Logged
Pages: [1]