[Matt Gibson]

...for 30lpm? 9 or 10?

More a question for the guys using the 30lpm machines. are you going a little too small? or a little too big?

[Kenny83]

use 9's to get your 200 bar, running at a 28lpm, or 10's if you want the 30lpm flow at around 180 bar.
I used a chemical lance for pressure testing, I put a .45 in one side and a .05 in the other, open the chemical valve up and test it that way
Did you ring tony?
 

[Matt Gibson]

Yeah mate, called him, i need to call him back monday for a firm price. He was trying to organise the cheapest courier for me. He sounds like a good bloke. Thanks again.

As for the nozzle size, im gonna need to buy a few different sizes, incase i need to run twin lances, or rinse down as you say. I havent had a good play with it yet, only picked it up today.

[david washbrook]

Matt did you buy it new and where from

[Kenny83]

yes, I know what you mean matt, that's the beauty of having the kew quick release spiggots, you can use a small turbo for general cleaning then throw a large fan in to rinse off at the end
 

[Matt Gibson]

David,

Didnt buy new. I bought a trafalgar trailer, and it had the Zeta in it. I know that the trafalgar trailers dont come standar with the zetas, so its been changed at some stage. Its a pretty mint machine from what i can see. clean, and looks well looked after.

Lee, I run a small quick release on the end of my lance, so i can change nozzles anyway without having to actually put a different lance on, but im in the process of ordering a bunch of the kew spiggots so i can change from whirlaway to lance without turning the machine off.

Im sick of walking back and forth to the van!

[jaespray]

hi matt
i use a 30ltr a min machine       depending on the custy"s water supply rate    i change my spinners on my fsc  one spinner is jetted for 30 & one at 15 ltr a min
where the 30ltr realy scores is on the rinse down   porouse material like tarmac you can float the krugg right offfffff
regards john

[Matt Gibson]

Nice one John,

Im gonna have to spend a few quid on nozzles i think, my supply is running low.