[♠Winp®oClean♠]

well it arrived today. The hose they supply looks less than 38mm so I'm doing a bit of head scratching to get mine to fit. looks like I'll have to butcher their cuff and fit mine on the outside somehow. I'd be interested to know how a 50mm hose fits.
Quality, ermmm well it doesn't appear to be very robust  It's the motor I'm more interested in. I'll tell you what though, my Lidels version (1500W) is an absolute steal - about £60 a couple of years back.

Which one you got Dave- 30 multi? Mine is of super quality & very robust- comparing it to the Karcher it replaced.

It's had some right abuse (albeit not for gutter cleaning), it's sucked rubble, soot, plaster the lot without issue!!

[Dave Willis]

Got this one from Argos   http://www.machinemart.co.uk/shop/product/details/nilfisk-multi-30t-wet-dry-vacuum-cleaner

Got it going with my 38mm hose. It seems to have loads of suction. Diabolical instruction booklet 
Nowhere to coil the flex either but very light.

[Avo]

I will measure my hose cuffs on my 50mm hose tomoro for you, I have 2 one is sky vac and the others nicks at guttercleaningsystems

[♠Winp®oClean♠]

Got this one from Argos   http://www.machinemart.co.uk/shop/product/details/nilfisk-multi-30t-wet-dry-vacuum-cleaner

Got it going with my 38mm hose. It seems to have loads of suction. Diabolical instruction booklet 
Nowhere to coil the flex either but very light.

Same as mine, had it about 18 months now I think. If I remember right, I think I coil the flex then hang it round the crevice nozzle when stuck in the tool holder on top.

I can say mine is top quality, I hope they haven't reduced their quality since!!

[Avo]

Got this one from Argos   http://www.machinemart.co.uk/shop/product/details/nilfisk-multi-30t-wet-dry-vacuum-cleaner

Got it going with my 38mm hose. It seems to have loads of suction. Diabolical instruction booklet 
Nowhere to coil the flex either but very light.

+1 good bit of kit lasting every well
Same as mine, had it about 18 months now I think. If I remember right, I think I coil the flex then hang it round the crevice nozzle when stuck in the tool holder on top.

I can say mine is top quality, I hope they haven't reduced their quality since!!

[David Kent @ KentKleen]

You can buy the stainless steel version of this machine.
http://consumer.nilfisk.co.uk/Products/VacuumCleaners/ConsumerVacuumCleaners/Wet-DryVacs/Multi30/NilfiskMulti30INOX/Introduction.aspx

[♠Winp®oClean♠]

You can buy the stainless steel version of this machine.
http://consumer.nilfisk.co.uk/Products/VacuumCleaners/ConsumerVacuumCleaners/Wet-DryVacs/Multi30/NilfiskMulti30INOX/Introduction.aspx

Not sure that is available in the UK.

[Dave Willis]

Used it today for a gutter clean and it's got loads of suction for a little'un, filter stays pretty clear and is dead easy to remove and clean. Good unit I think.

[Avo]

Last job of the day I had a mare on.. Tiles were far to over hung and couldn't get the finest nozzles in it to clean

[brad t]

Avo do both hose sets fit the vac
Thanks B

[Avo]

Yes the guttercleaningsystem hose and sky vac hose I have fit the nilfisk vac with out mods needed

[Avo]

http://www.polarbrite.co.uk/index.php?main_page=index&cPath=72_74&sort=20a&page=2

Im sure there 51mm hose and cuff is the one I have matey