[Total shine cleaning services]

ordered yesterday, arrived this morning and fitted them to a clx 27, my pole has stopped spinning and collapsing, me not stressed anymore

graham

[CLEANCARE WC]

ordered yesterday, arrived this morning and fitted them to a clx 27, my pole has stopped spinning and collapsing, me not stressed anymore

graham

i will do mine at the wknd...got a new pole to play with tomorrow.

[Total shine cleaning services]

what u bought.?

graham

[CLEANCARE WC]

what u bought.?

graham

slx22 had the clx22 for 3 years its earnt its retirement! the clamps are for my 30ft slx

[CLEANCARE WC]

was there enough glue in them sachets graham? i expect alex would send enough, they just look small to me 

[Total shine cleaning services]

just about, I had no instructions, there was one clear and one black, I mixed them so I hope I done it right, on my way out in a min so will soon find out

graham

[Alex Gardiner]

was there enough glue in them sachets graham? i expect alex would send enough, they just look small to me 

There is enough glue in one sachet to do about 10 clamps - there is much more than it looks.

[Alex Gardiner]

just about, I had no instructions, there was one clear and one black, I mixed them so I hope I done it right, on my way out in a min so will soon find out

graham

There are full fitting instructions on this video which is also shown on the Clamp Upgrade product page - http://youtu.be/MUW1WpzfpyE

http://www.gardinerpolesystems.co.uk/acatalog/Gardiner-Smart-Clamp-DIY-Upgrade-Kits-ClampII_SET.html

On this video at 6.15 minutes in it shows how to mix and apply the glue from these sachets.

It is very important when fitting the new clamps that all of the steps in this video are followed exactly to ensure a trouble free bond.

[ben M]

just about, I had no instructions, there was one clear and one black, I mixed them so I hope I done it right, on my way out in a min so will soon find out

graham

There are full fitting instructions on this video which is also shown on the Clamp Upgrade product page - http://youtu.be/oz2NiLDIn40

http://www.gardinerpolesystems.co.uk/acatalog/Gardiner-Smart-Clamp-DIY-Upgrade-Kits-ClampII_SET.html

On this video at 6.15 minutes in it shows how to mix and apply the glue from these sachets.

It is very important when fitting the new clamps that all of the steps in this video are followed exactly to ensure a trouble free bond.

This video has been removed by the user 

[Total shine cleaning services]

can't access it Alex, was I right in mixing the satchets..? prior to this I cut off existing clamps with hacksaw, sanded down the top of each section then wiped with them clean with the alcohol wipe, mixed satchets then placed glue on new clamps and placed these onto the sections

graham

[Alex Gardiner]

This video has been removed by the user 

Duh! I put the link to the old video - here is the correct link - http://youtu.be/MUW1WpzfpyE

[Alex Gardiner]

can't access it Alex, was I right in mixing the satchets..? prior to this I cut off existing clamps with hacksaw, sanded down the top of each section then wiped with them clean with the alcohol wipe, mixed satchets then placed glue on new clamps and placed these onto the sections

graham

I have put the correct link up now which has also been on the website for a few days - http://youtu.be/MUW1WpzfpyE

Sounds good to me.

It is best also to lightly abrade and then wipe the inside of each clamp body. Mixing the glue is best done before opening the sachet. Just squeeze the glue back and forth inside until fully mixed, then cut a corner off and squeeze out as needed. It is best practice to apply glue to both the inside of the clamp body and the section before twisting it together.

[Total shine cleaning services]

thanks I think I was thorough enough

graham