[KLEENAWAY]

Anybody selling an interpump ws202 and gearbox or similar? Or know anyone that is?

Danny

[KLEENAWAY]

Bump

[KLEENAWAY]

bump bump 

[Rob_Mac]

I've got a 22LPM pump up the unit. (I could have two up there - one needs new seals)

Will be up there tomorrow, may be a Hawk pump, could be Interpump Roger will know as he bought it. It came off the Hot & Mighty when it had a bigger pump.

Only done 250 hours

Rob

[Matt Gibson]

How much for the one that needs new seals Rob? Is that a 22lpm as well?

[KLEENAWAY]

I've got a 22LPM pump up the unit. (I could have two up there - one needs new seals)

Will be up there tomorrow, may be a Hawk pump, could be Interpump Roger will know as he bought it. It came off the Hot & Mighty when it had a bigger pump.

Only done 250 hours

Rob

Thanks for the reply rob.

Im not sure if the engine i have has the guts to power that.....a 10hp diesel lombardini ??
Im defo interested if you think it could though?

Cheers again

Danny

[Kenny83]

Your lombardini won't power an interpump 202 either mate, you will need a twin cylinder diesel to power one of those.
The only way it will power it is if you put a .75 or 8 jet on the end but you will lose pressure and only be running about 170 bar.
Ask Lee Blastaway, he's tried it
 

[KLEENAWAY]

Your lombardini won't power an interpump 202 either mate, you will need a twin cylinder diesel to power one of those.
The only way it will power it is if you put a .75 or 8 jet on the end but you will lose pressure and only be running about 170 bar.
Ask Lee Blastaway, he's tried it
 

Oh brilliant  haha! That my only option lee? 170 bar I just short of 2500psi....do you not think that's enough with 15lpm mate?

Danny

[Kenny83]

a 202 is a 21 litre pump, which a 10hp won't power, it will power a 15 litre fine, but thats a 201, not sure which one your looking for or have?
 

[Rob_Mac]

I'm in London tomorrow and wont be able to get up there until Wednesday.

I will see what they are and post on here.

Cheers

Rob

[Matt Gibson]

Cheers Rob.

I thought a 11hp would power a WS202 just not push out the full 21lpm?

[KLEENAWAY]

a 202 is a 21 litre pump, which a 10hp won't power, it will power a 15 litre fine, but thats a 201, not sure which one your looking for or have?
 

I thought the 202 was 15lpm   ! Shows what I know. I want the 201 then. What sort or performance would I get out of a 202 lee? And how much do you think I should be looking to pay for either the 202 or 201 mate?

Thanks a lot for clearing that up pal

Danny

[KLEENAWAY]

I'm in London tomorrow and wont be able to get up there until Wednesday.

I will see what they are and post on here.

Cheers

Rob

Thanks a lot matey

[KLEENAWAY]

Cheers Rob.

I thought a 11hp would power a WS202 just not push out the full 21lpm?

Get in line Matt....theirs a queue here 

[evil genius]

Out of interest as I would like to go down the route in the very near future.
Would a 13hp petrol run a ws202 at the full 21lpm?
Thanks.
Ian

[Kenny83]

a 202 is 200 bar @ 21 litres per min
a 201 is 200 bar at 15 litres per min
With a 10 hp diesel I would go for a 201 (15 litre)
21 litres is better but running at 170 bar it won't quite have the 'cut' that you need for running a whirlaway on block paving for cuttingthrough moss etc
prices are around 560 brand new with a gearbox, (both 201 and 202 are the same prices

Matt, flow is determined by rpm, an 11hp honda petrol will run at the same speed as a 13 (around 3100 to 3500 rpm)
It's when you try to push 21 litres through it's correct jet (.65) when the engine (10hp diesel) will struggle and begin to stall, but by reducing the pressure by putting a large nozzle in .75 or .8 you will still get the  flow but the engine won't be struggling as much so you will get the full 21 litres but at a reduced pressure

If you get me?
Lol
 

[Kenny83]

Out of interest as I would like to go down the route in the very near future.
Would a 13hp petrol run a ws202 at the full 21lpm?
Thanks.
Ian

Yes, perfectly
 

[KLEENAWAY]

a 202 is 200 bar @ 21 litres per min
a 201 is 200 bar at 15 litres per min
With a 10 hp diesel I would go for a 201 (15 litre)
21 litres is better but running at 170 bar it won't quite have the 'cut' that you need for running a whirlaway on block paving for cuttingthrough moss etc
prices are around 560 brand new with a gearbox, (both 201 and 202 are the same prices

Matt, flow is determined by rpm, an 11hp honda petrol will run at the same speed as a 13 (around 3100 to 3500 rpm)
It's when you try to push 21 litres through it's correct jet (.65) when the engine (10hp diesel) will struggle and begin to stall, but by reducing the pressure by putting a large nozzle in .75 or .8 you will still get the  flow but the engine won't be struggling as much so you will get the full 21 litres but at a reduced pressure

If you get me?
Lol
 

Thanks alot mate! Had to read that second bit 3 times for it to sink In properly. Iv seen the pumps on eBay for that price. Do you not get second hand pumps lee? I know you get quite a few different machines in.

Thanks again for the info mate

Danny

[Kenny83]

Hi mate, i do have a ws201 complete with gearbox and unloader valve, I would want half list price for it (275) but only thing is Ive never tried it so not sure if it needs any parts like seals, or unloader, I could whip the head off an check the psitons and valves but everything else I can't check unless it was to go on an engine. If you want to bring your engine then I could do it for 350 fitted and if it needs anything then I would supply in the price?
thanks

[Matt Gibson]

Cheers Rob.

I thought a 11hp would power a WS202 just not push out the full 21lpm?

Get in line Matt....theirs a queue here 

I know mate, he said there was two.. ill wait in line, im not fussed