[Roland S]

I need to fit some new nozzles on my fsc. It currently  has 25025 nizzles fitted but i see they work upto 30 litres per minute 275 bar so i'm wondering if i need a different size for my  250 bar 15 litre/min machine. Any suggestions?

Thanks in advance

[Matt Gibson]

The nozzles your running are right. you should be using and 05 nozzle on your lance, so because the whirlaway has two nozzles you split it. 05 divided by two equals 025.

[Kenny83]

It's 250 bar so 04 is what you need mate... http://www.pressure-washing.co.uk/nozzle-chart.php ...
That would mean 2 x 1502 or 2502

[Kenny83]

It's 250 bar so 04 is what you need mate... http://www.pressure-washing.co.uk/nozzle-chart.php ...
That would mean 2 x 1502 or 2502 in your whirlaway.

[Matt Gibson]

ahhh 250 bar... i need new glasses..

[Kenny83]

specsavers.... 

[Matt Gibson]

yeah, i should've gone..

[Roland S]

It's 250 bar so 04 is what you need mate... http://www.pressure-washing.co.uk/nozzle-chart.php ...
That would mean 2 x 1502 or 2502

thanks for your help both of you, who's cheapest for bits and bobs like this?

[Kenny83]

ebay, theres a company based in stoke called kryle, they're the cheapest for nozzles, 2.99 each
 

[Blast Away]

Lee, Harrison gave me nozzles for a quid each the other week. I said ''You'll go bust mate'' 

[Kenny83]

Lee, Harrison gave me nozzles for a quid each the other week. I said ''You'll go bust mate'' 

Haha, he's just trying to look after you so you keep going back.  how you getting on with your new engine? what have you decided to do with it?

[Rob_Mac]

Lee

Where are they in Stoke?

Rob

[Kenny83]

Lee

Where are they in Stoke?

Rob

Not sure to be honest, I found them through ebay by searching nozzles and selecting cheapest 1st, I bought 10 from them the other day and 10 karcher fittings, he's a decent guy, they also do machine repairs and machining I think
Just googled them, heres the address...
kryle Technical services
Ivory Buildings
Madeley Street
Stoke-On-Trent
Staffordshire
ST6 5AT

 

[Blast Away]

Lee, Harrison gave me nozzles for a quid each the other week. I said ''You'll go bust mate'' 

Haha, he's just trying to look after you so you keep going back.  how you getting on with your new engine? what have you decided to do with it?

Gonna belt drive the pump I'm putting on it, either a trip to Ilkeston to a guy there who can do it orLyndon's guy in Ramsbottom if he's got time. Either way I'm gonna use tomorrow to press on and tart the engine up etc.

[Kenny83]

if it's not raining I'm going to seal that job, need to get it out the way,... could do with a day off myself, catch up on some machines, sort the van out, etc.

[Roland S]

ebay, theres a company based in stoke called kryle, they're the cheapest for nozzles, 2.99 each
 

Yeah i saw that he didn't have the size i needed though unfortunately, was out of stock. Got some fir £12 for 2 which is ok, thanks anyway