[PurefectWindowCleaning]

My CLX arrived today, ive just tested it out and only 1 pencil jet is working? Ive blowing through the tubing and its blocked or summin?

Anyone got any advice? Its a mixed dual trim sill brush

[Alex Gardiner]

My CLX arrived today, ive just tested it out and only 1 pencil jet is working? Ive blowing through the tubing and its blocked or summin?

Anyone got any advice? Its a mixed dual trim sill brush

This is strange!

First off check visually through the jet hole from the bristle side of the brush. Then if this is clear remove the clear jet hose from the back of the jet and turn on the water flow. If there is something in the jet hose blocking it this should allow it to flush out. Tip for removing the hose from the jets is to pour a kettle of water over the jet and hose before pulling off.

[Klean07]

Hold your finger on the one thats working to block then this should tell you if you have a faulty one or not!

[PurefectWindowCleaning]

My CLX arrived today, ive just tested it out and only 1 pencil jet is working? Ive blowing through the tubing and its blocked or summin?

Anyone got any advice? Its a mixed dual trim sill brush

This is strange!

First of check visually through the jet hole from the bristle side of the brush. Then if this is clear remove the clear jet hose from the back of the jet and turn on the water flow. If there is something in the jet hose blocking it this should allow it to flush out. Tip for removing the hose from the jets is to pour a kettle of water over the jet and hose before pulling off.

Thanks for the quick reply, i shall give that a go now.

[PurefectWindowCleaning]

The tubing is fine as it flows after ive disconnected it from the back of the brush. So its something to do with the jet?

[PurefectWindowCleaning]

Shall i stick a needle or summin down there? 

[Klean07]

Connect it up and turn everything on then do as I said then hopefully this will unblock whatever is blocking it!

[PurefectWindowCleaning]

Connect it up and turn everything on then do as I said then hopefully this will unblock whatever is blocking it!

I done that first of all and it didnt work

[Alex Gardiner]

Shall i stick a needle or summin down there? 

Can you see through the jet? Does it look clear through the 2mm hole?

Certainly you can try clearing it with a needle.

[windiewasher]

A bit of debris from your water?

[PurefectWindowCleaning]

Shall i stick a needle or summin down there? 

Can you see through the jet? Does it look clear through the 2mm hole?

Certainly you can try clearing it with a needle.

The needle passes through the clear jet, and not the blocked one (obviously) lol

[windiewasher]

Shall i stick a needle or summin down there? 

Can you see through the jet? Does it look clear through the 2mm hole?

Certainly you can try clearing it with a needle.

The needle passes through the clear jet, and not the blocked one (obviously) lol

Take it off any suck

[PurefectWindowCleaning]

What ever is blocked in there, it just snapped my needle 

[Alex Gardiner]

What ever is blocked in there, it just snapped my needle 

Sounds like a faulty jet - I have never had this before in over 50,000 of these jets!

I will get the Office to send out a replacement brush to you tomorrow. We can then have the brush/jet back for examination.

Could you email me on alex@agardiner.co.uk with your full name, address and order number.

[PurefectWindowCleaning]

Thanks, Alex.

Its as if a hole hasent been drilled in the jet in the first place?! 

Looks like tomorrow ill have to use my unger breeze block brush head with my nice new CLX and prob snap the pole 


Ill send details now

[Alex Gardiner]

Thanks James, email received.

[Dora Jarr]

Griffin always tells his alumni that if it doesn't spurt first time, suck on it, then a bit harder until you get a mouthful.