[Rob_Mac]

We have twin operator turbo nozzles, twin operator flat nozzles, single operator turbo nozzles and single operator flat nozzles.

This gets complicated because the nozzles aren't the same size for the Thor and H & M, also they are different for the FSCs.

I spend my life trying to colour code everything!

Rob

[Blast Away]

We did a Tesco B&K site brick clean and car park.

[trevor perry]

Hi Rob

I'm Hi-jacking your post

We are looking for something really really good - HOT Water min 21 ltr per min flow rate, possibly twin operator

Any thoughts - assuming money is no object

 if you want twin operator then you will need to go above 21ltr a minute that is unless you are only using the twin operation for gum removal, the trouble is that if you go above 21ltr a minute then you would struggle to get hot unless like rob suggests you use two burners, we use the Lavor Thermic 17 machines these are hot 3000psi and 21ltr a minute but if you buy new are well over priced at about £13k but they are a well built reliable machine ,second hand ones do come up from time to time if you keep your eyes open

[Rob_Mac]

Darren

You are on a different sector to me, they are peculiar these principal contractors as they don't like you bridging into the other sectors. It is really weird, you would expect them to find a decent contractor and use them everywhere they have works but it just doesn't work that way.

Takes some getting used to - i've just been tipped the nod on some works - you don't get invited you have to know about the works. Bloody frustrating at times!!!

Rob

[Matt Gibson]

We have twin operator turbo nozzles, twin operator flat nozzles, single operator turbo nozzles and single operator flat nozzles.

This gets complicated because the nozzles aren't the same size for the Thor and H & M, also they are different for the FSCs.

I spend my life trying to colour code everything!

Rob

Gotcha. You should buy different colour nozzle protectors.

[Darran Smith]

Rob

Construction Site Cleaning has always been the same.

Apart from window - facade - gutter - carpet - pressure washing/cleaning etc

50% of our work is cleaning new construction sites in/out - they can be ok - sometimes

[Rob_Mac]

Bit of insulation tape round the nozzles.

Have I mentioned my FSCs - now they are a different kettle of fish - jeez triple jetted - single operator for the Thor, for the H & M, twin operator for the Thor, for the H & M _ i'm going to have a nervous breakdown on nozzles alone if I get anymore gear!!!!

Rob

[Rob_Mac]

Darren

I could put three hot machines plus three dry steam machines on that chewing gum for you,  I could probably add another three machines on top of that as well.

Just a thought

Rob

[Blast Away]

Darren, my balls aren't as big but I can put 2 hot machines and 1 dry steamer on that chewing gum for you and drag the job out for a third of what Rob would charge you!

 

[Rob_Mac]

You cheeky twunt

You have got to have big balls putting that post up.

That did make me laugh!!!

Rob

[Rob_Mac]

Get off my topic you northern t**t

Rob

[Blast Away]

You cheeky twunt

You have got to have big balls putting that post up.

That did make me laugh!!!

Rob

Sorry mate it might be 1/4 then!   No overheads!  

Let's do it together Rob.  

[Blast Away]

Twunt is my word!

[Rob_Mac]

I would happily work alongside you Lee - as long as you did as you were told!!!

If I know Darren though he has probably already got this sown up.

The problem you have Lee - i cleaned 18000sqm in November - that is a lot bigger than the patios you do!!!

Rob

[Darran Smith]

Stop fighting lads - weve only just quoted it - not definate yet 

We can sort it but it is always useful to know someone who we can sub out to if and when needed.

I'm a Northerner living down South so my vote my point towards the Northern lads........

[Rob_Mac]

Darren

Be careful Lee can be a bit like Christian off the Hotel - the Torquay hotel fly on the wall!!!

Rob

[Blast Away]

[Darran Smith]

Hi Rob

I'm Hi-jacking your post

We are looking for something really really good - HOT Water min 21 ltr per min flow rate, possibly twin operator

Any thoughts - assuming money is no object

 if you want twin operator then you will need to go above 21ltr a minute that is unless you are only using the twin operation for gum removal, the trouble is that if you go above 21ltr a minute then you would struggle to get hot unless like rob suggests you use two burners, we use the Lavor Thermic 17 machines these are hot 3000psi and 21ltr a minute but if you buy new are well over priced at about £13k but they are a well built reliable machine ,second hand ones do come up from time to time if you keep your eyes open

I have always liked the look of these but never heard anyone who uses them. I know a dealer in Bulgaria who sells these - i will ask him for prices - last time I checked he wanted about 10k EURO

[Darran Smith]

Ashford Kent HQ for the Rhinoman

Crawley Depot for the Rhino Lackies!

[Rob_Mac]

Between Barnsley & Doncaster in a small mining (ex) area is a place called Bolton on Dearne.

That's where I grew up.

Lee I am going to polish the hell out of the mossys get in my van, drive up to your place and kiss you!!!!!!

Rob